TC7WT125FU

Features:






Specifications






Description

       Here are some general descriptions of the TC7WT125FU. The TC7WT125FU is a high speed CMOS DUAL BUS BUFFERS fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The input threshold levels are compatible with TTL output voltage. The require 3-state control input G to be set high to place the output into the high impedance. All inputs are equipped with protection circuits against static discharge or transient excess voltage.
      Here are some features of the TC7WT125FU. The typical high speed is 13ns at VCC is 5 V. The low power dissipation is 2A at Ta is 25 . The maximum of compatible with TTL outputs is 0.8 V and the minimum of compatible with TTL outputs is 2 V. The output drive capability is 15LSTTL Loads. The minimum of symmetrical output impedance is 6mA.
      Here are some maximum ratings of the TC7WT125FU when Ta is 25 . The supply voltage range is -0.5 to 7 V. The DC input voltage is -0.5 to VCC+0.5 V. The DC output voltage is -0.5 to VCC+0.5 V. The input diode current is ±20 mA. The output diode current is ±20 mA.The DC output current is ± 35mA. The DC VCC/Ground current is ±37.5 mA. The power dissipation is 300 mW. The storage temperature is -60 to 150. The lead temperature is 260.
      Here are some recommened operating conditions of the TC7WT125FU. The supply voltage range is 4.5 to 5.5 V. The input voltage is 0 to VCC V. The output voltage is 0 to VCC V. The switch I/O voltage is 0 to VCC V. The control input diode current is ±20 mA. The operating temperature is -40 to 85. The input rise and fall time is 0 to 500ns.