Features: • Operating voltage: VCC = 4.5~5.5 V• High speed operation: tpd = 0.32 ns (max)• Low on resistance: RON = 5 (typ.)• ESD performance: Machine model ±200 V Human body model ±2000 V• TTL level input (control input)• Low Power Dissipation: Icc = 10 A (m...
TC7SBD384AFU: Features: • Operating voltage: VCC = 4.5~5.5 V• High speed operation: tpd = 0.32 ns (max)• Low on resistance: RON = 5 (typ.)• ESD performance: Machine model ±200 V Human bo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.05 - .08 / Piece
Gates (AND / NAND / OR / NOR) 2-Input NAND Gate 5Pin High Speed
SYMBOL | PARAMETER | RATING | UNIT |
VCC | Power supply range | −0.5~7.0 | V |
VIN | DC input voltage | −0.5~7.0 | V |
VS | DC switch voltage | −0.5~7.0 | V |
IIK | Input diode current | −50 | mA |
IS | Continuous channel current | 128 | mA |
PD | Power dissipation | 200 | mW |
ICC/IGND | DC VCC/GND current | ±100 | mA |
Tstg | Storage temperature | 65 to +150 |
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
The TC7SBD384AFU provides single bit of high-speed TTL-compatible switching. The low on resistance of the switch allows connections to be made with minimal propagation delay.
The TC7SBD384AFU is organized as just 1-bit low-impedance switch with output-enable (OE) input. When OE is low, the switch is on and data can flow from port A to port B, or vice versa. When OE is high, the switch is open and a high-impedance state exists between the two ports.
The TC7SBD384AFU is enable to realize the shift of signal level from 5 V to 3.3 V. All inputs are equipped with protection circuits against static discharge.