TC7PB54FC

Note 1: Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC performance or even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 2: N-channel MOSFET allowable current to clamp the unused pin to ground.

The TC7PB54FC is a single 1-of-3 high-speed CMOS demultiplexer designed for low-voltage applications. The low ON-resistance of the switch allows the input (COM) to be connected to the outputs (Ch0 and Ch1) while maintaining CMOS low power dissipation. The TC7PB54FC uses P-channel MOSFETs for the switch block between the input and output pins.

The single-input multiplexer can direct the potential supplied on the COM pin to one of the Ch0 to Ch2 pins depending on the combined state of control pins A and B. The unused Chx pins are clamped to ground using an N-channel MOSFET.

All inputs of TC7PB54FC are equipped with protection circuits against static discharge.