TC74LVX374F

The TC74LVX374F is one member of the TC74LVX374 series.The TC74LVX374 is a high speed CMOS OCTAL D-FLIP FLOP fabricated with silicon gate C2MOS technology.Designed for use in 3.3 Volt systems, it achieves high speed operation while maintaining the CMOS low power dissipation.This device is suitable for low voltage and battery operated systems.This 8-bit D-type flip-flop is controlled by a clock input(CK) and a output enable input (OE).When the OE input is high, the eight outputs are in a high impedance state.

Features of the TC74LVX374F are:(1)high speed: fmax=160MHz (Typ) VCC=3.3V;(2)low power dissipation:ICC = 4A (Max) at TA = 25;(3)power down protection is provided on inputs;(4)balanced propagation delays;(5)low noise: VOLP =0.8V(max);(6)pin and function compatible with 74HC374.An input protection circuit ensures that 0 to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up.This circuit prevents device destruction due to mismatched supply and input voltages.

The absolute maximum ratings of the TC74LVX374F can be summarized as:(1)supply voltages range:-0.5 to 7.0 V;(2)storage temperature:-65 to +150;(3)DC input voltage:-0.5 to 7.0 V;(4)input diode current:-20mA;(5)power dissipation:180mW.TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications of the TC74LVX374F.Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook.