DescriptionThe TC74LCX257F is a high parformance CMOS MULTIPLEXER. Designed for use in 3.3 volt systems, it achieves high speed operation while maintaining the CMOS low power dissipation. The feature of TC74LCX257F are as follows: (1)low voltage operation: VCC = 2.0~3.6V; (2)high speed operation: ...
TC74LCX257F: DescriptionThe TC74LCX257F is a high parformance CMOS MULTIPLEXER. Designed for use in 3.3 volt systems, it achieves high speed operation while maintaining the CMOS low power dissipation. The featur...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TC74LCX257F is a high parformance CMOS MULTIPLEXER. Designed for use in 3.3 volt systems, it achieves high speed operation while maintaining the CMOS low power dissipation. The feature of TC74LCX257F are as follows: (1)low voltage operation: VCC = 2.0~3.6V; (2)high speed operation: tpd = 6.0ns(Vcc = 3.0~3.6V); (3)output current: IOH/IOL = 24mA(min)(Vcc = 3.0V); (4)latch-up performance: ±500mA; (5)available in JEDEC SOP, EIAJ SOP and TSSOP; (6)power down protection is provided on all inputs and outputs; (7)pin and function compatible with the 74 series.
The absolute maximum ratings of the TC74LCX257F are: (1)supply voltage range: -0.5~7.0V; (2)DC input voltage(DIR, OE): -0.5~7.0V; (3)DC bus I/O voltage: -0.5~7.0V; (4)input diode current: -50mA; (5)output diode current: ±50mA; (6)DC output current: ±50mA; (7)power dissipation: 180mW; (8)DC Vcc/Ground current: ±100mA; (9)storage temperature: -65~150.
The following is about the electrical characteristics of TC74LCX257F: (1)input voltage: "H" level 2.0V min, "L" level 0.8V max; (2)output voltage: "H" level 2.2V min at VIN = VIH or VIL, IOH = -12mA, "L" level 0.4V max at VIN = VIH or VIL, IOH = 12mA; (3)input leakage current: ±5.0A max at VIN = 0~5.5V; (4)3-state output off-state current: ±5.0A max at VIN = VIH or VIL, VOUT = 0~5.5V; (5)power off leakage current: 10.0A max at VIN/VOUT = 5.5V; (6)quiescent supply current: 10.0A max at VIN = Vcc or GND; (7)increase in Icc Per input: 500A at VIH = Vcc - 0.6V.