Function: Master Reset
Number of Elements: 1
Trigger Type: Positive Edge
Operating Temperature: -40°C ~ 85°C
Series: 74HC
Output Type: Differential
Current - Output High, Low: 5.2mA, 5.2mA
Voltage - Supply: 2 V ~ 6 V
Type: D-Type Bus
Number of Bits per Element: 4
Mounting Type: Through Hole
Packaging: Tube
Package / Case: 16-DIP (0.300", 7.62mm)
Delay Time - Propagation: 16ns
Frequency - Clock: 63MHz
Manufacturer: Toshiba
DescriptionThe TC74HC175AP is designed as a high speed CMOS D type flip-flop fabricated with silicon gate C2MOS technology.
TC74HC175AP has seven features. (1)High speed which would be typ 63MHz at Vcc=5V. (2)Low power dissipation which means Icc=4uA max at Ta=25°C. (3)High noise immunity which would be min 28%Vcc. (4)Symmetrical output impedance which would be 4mA min. (5)Balanced propagation delays. (6)Wide operating voltage range which would be from 2V to 6V. (7)Pin and function compatible with 74LS175. Those are all the main features.
Some TC74HC175AP absolute maximum ratings have been concluded into several points as follow. (1)Its supply voltage range would be from -0.5V to 7.0V. (2)Its DC input voltage would be from -0.5V to Vcc+0.5V. (3)Its DC output voltage would be from -0.5V to Vcc+0.5V. (4)Its input diode current would be +/-20mA. (5)Its output diode current would be +/-20mA. (6)Its DC output current would be +/-25mA. (7)Its DC Vcc/ ground current would be +/-50mA. (8)Its power dissipation would be 500mW. (9)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some DC electrical TC74HC175AP characteristics at Vcc=4.5V are concluded as follow. (1)Its high level input voltage would be min 3.15V. (2)Its low level input voltage would be max 1.35V. (3)Its high level output voltage would be min 4.4V and typ 4.5V at Ioh=-20uA and would be min 4.18V and typ 4.31V at Ioh=-4mA. (4)Its low level output voltage would be max 0.1V at Iol=20uA and would be max 0.26V at Iol=4mA.
TC74HC175AP should be noted that toshiba is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the users, when utilizing these products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property. And so on. If you have any question or suggestion or want to know more TC74HC175AP information please contact us for details. Thank you!
Parameters: | Technical/Catalog Information | TC74HC175AP |
| Vendor | Toshiba |
| Category | Integrated Circuits (ICs) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP |
| Function | Master Reset |
| Number of Bits per Element | 4 |
| Number of Elements | 1 - Single |
| Current - Output High, Low | 5.2mA, 5.2mA |
| Output Type | Differential |
| Trigger Type | Positive Edge |
| Type | D-Type Bus |
| Packaging | Tube |
| Operating Temperature | -40°C ~ 85°C |
| Delay Time - Propagation | 16ns |
| Frequency - Clock | 63MHz |
| Voltage - Supply | 2 V ~ 6 V |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | TC74HC175AP
TC74HC175AP
|
TC74HC175AP Data Sheet
