TC1427

Features:

•Low Cost
•Latch-Up Protected: Will Withstand 500mA
Reverse Output Current
•ESD Protected ±2kV
•High Peak Output Current: 1.2A
•Wide Operating Range
-4.5V to 16V
•High Capacitive Load Drive Capability: 1000pF in
38nsec
•Low Delay Time: 75nsec Max
•Logic Input Threshold Independent of Supply
Voltage
•Output Voltage Swing to Within 25mV of Ground or V_DD
•Low Output Impedance: 8Ω




Application

•Power MOSFET Drivers
•Switched Mode Power Supplies
•Pulse Transformer Drive
•Small Motor Controls
•Print Head Drive




Specifications

Parameter NameValuePowerDual Peak Output Current (mA)1200Output Resistance (RH/RL)(Max. @ 25°C)18/12Max. Supply Voltage (V)16Input/Output Delay (td1, td2)1 (ns)75/75ConfigurationNon-Inverting DescriptionLow-side MOSFET Drivers, 0.5A to 1.2A Peak Output CurrentOperating Temp. Range (°C)0 to 70

Parameter Name	Value
Power	Dual
Peak Output Current (mA)	1200
Output Resistance (RH/RL)(Max. @ 25°C)	18/12
Max. Supply Voltage (V)	16
Input/Output Delay (td1, td2)1 (ns)	75/75
Configuration	Non-Inverting
Description	Low-side MOSFET Drivers, 0.5A to 1.2A Peak Output Current
Operating Temp. Range (°C)	0 to 70

Supply Voltage......................................................+18V
Input Voltage, Any Terminal
.....................................V_DD+ 0.3V to GND 0.3V
Power Dissipation (T_A 70°C)
PDIP..........................................................730mW
SOIC.........................................................470mW
Derating Factor
PDIP........................................................8mW/°C
SOIC........................................................4mW/°C
Operating Temperature Range
C Version.........................................0°C to +70°C
Storage Temperature Range..............-65°C to +150°C




Description

The TC1426/27/28 are a family of 1.2A dual high- speed drivers. CMOS fabrication is used for low power consumption and high efficiency. These devices are fabricated using an epitaxial layer to effectively short out the intrinsic parasitic transistor responsible for CMOS latch-up. They incorporate a number of other design and process refinements to increase their long-term reliability. The TC1426 is compatible with the bipolar DS0026, but only draws 1/5 of the quiescent current. The TC1426/27/28 are also compatible with the TC426/27/28, but with 1.2A peak output current rather than the 1.5A of the TC426/27/28 devices. Other compatible drivers are the TC4426/27/28 and the TC4426A/27A/28A. The TC4426/27/28 have the added feature that the inputs can withstand negative voltage up to 5V with diode protection circuits. The TC4426A/27A/28A have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nanoseconds range. All of the above drivers are pin compatible. The high-input impedance TC1426/27/28 drivers are CMOS/TTL input-compatible, do not require the speed-up needed by the bipolar devices, and can be directly driven by most PWM ICs. This family of devices is available in inverting and non-inverting versions. Specifications have been optimized to achieve low-cost and high-performance devices,well-suited for the high-volume manufacturer.

The TC1426/TC1427/TC1428 are a family of 1.2A dual high-speed drivers. CMOS fabrication is used for low power consumption and high efficiency. These devices are fabricated using an epitaxial layer to effectively short out the intrinsic parasitic transistor responsible for CMOS latch-up. They incorporate a number of other design and process refinements to increase their long-term reliability.

The TC1426 is compatible with the bipolar DS0026, but only draws 1/5 of the quiescent current. The TC1426/ TC1427/TC1428 are also compatible with the TC426/ TC427/TC428, but with 1.2A peak output current rather than the 1.5A of the TC426/TC427/TC428 devices. Other compatible drivers are the TC4426/TC4427/ TC4428 and the TC4426A/TC4427A/TC4428A. The TC4426/TC4427/TC4428 have the added feature that the inputs can withstand negative voltage up to 5V with diode protection circuits. The TC4426A/TC4427A/ TC4428A have matched input to output leading edge and falling edge delays, t_D1and t_D2, for processingshort duration pulses in the 25 nanoseconds range.

All of the above drivers are pin compatible. The high-input impedance TC1426/TC1427/TC1428 drivers are CMOS/TTL input-compatible, do not require the speed-up needed by the bipolar devices, and can be directly driven by most PWM ICs. This family of devices is available in inverting and non- inverting versions. Specifications have been optimized to achieve low-cost and high-performance devices, well-suited for the high-volume manufacturer.