Features: · Zero Ground Current for Longer Battery Life· Very Low Dropout Voltage· Choice of 50mA (TC1072) and 100mA (TC1073) Output· High Output Voltage Accuracy· Standard or Custom Output Voltages· Power-Saving Shutdown Mode· ERROR Output Can Be Used as a Low Battery Detector or Processor Reset ...
TC1073: Features: · Zero Ground Current for Longer Battery Life· Very Low Dropout Voltage· Choice of 50mA (TC1072) and 100mA (TC1073) Output· High Output Voltage Accuracy· Standard or Custom Output Voltages...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Zero Ground Current for Longer Battery Life
· Very Low Dropout Voltage
· Choice of 50mA (TC1072) and 100mA (TC1073) Output
· High Output Voltage Accuracy
· Standard or Custom Output Voltages
· Power-Saving Shutdown Mode
· ERROR Output Can Be Used as a Low Battery Detector or Processor Reset Generator
· Bypass Input for Ultra Quiet Operation
· Over Current and Over Temperature Protection
· Space-Saving 6-Pin SOT-23A Package
· Pin Compatible Upgrades for Bipolar Regulators
· Battery Operated Systems
· Portable Computers
· Medical Instruments
· Instrumentation
· Cellular/GSM/PHS Phones
· Linear Post-Regulators for SMPS
· Pagers
Parameter Name | Value |
Max Input Voltage | 6 |
Output Voltage (v) | 2.5, 2.7, 2.8, 2.85, 3.0, 3.3, 3.6, 4.0, 5.0 |
Typical Active Current (A) | 50 |
Typical Dropout Voltage @ Max. lout (mV) | 180 |
Typical Output Voltage Accuracy (%) | 0.5 |
Output Capacitor Type | Aluminum/Tantalum |
Input Voltage......................................................... 6.5V
Output Voltage...........................(-0.3V) to (VIN +0.3V)
Power Dissipation...............Internally Limited (Note 6)
Maximum Voltage on Any Pin ........ VIN +0.3V to -0.3V
Operating Temperature Range......-40 < TJ < 125
Storage Temperature......................... -65 to +150
*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied.
Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.