Features: • Output current capability and number of outputs: 0 mA × 16 outputs• Constant current range: 2 to 90 mA• Application output voltage: 0.7 V (output current 2 to 80 mA) .4 V (output current 2 to 40 mA)• For anode-common LEDs• Input signal voltage level: 3.3-V...
TB62726AFG: Features: • Output current capability and number of outputs: 0 mA × 16 outputs• Constant current range: 2 to 90 mA• Application output voltage: 0.7 V (output current 2 to 80 mA) .4...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ` Two stepping motors driven by micro-step pseudo sine wave are controlled by ...
Characteristics | Symbol | Rating | Unit | |
Supply voltage | VDD | 6 | V | |
Input voltage | VIN | −0.2 to VDD + 0.2 | V | |
Output current | IOUT | +90 | mA/ch | |
Output voltage | VOUT | −0.2 to 17 | V | |
Power dissipation (Note 3) |
ANG-type (when not mounted) |
Pd1 | 1.25 | W |
AFG-type (on PCB) | 1.78 | |||
ANG-type (when not mounted) |
Pd2 | 0.83 | ||
AFG-type (on PCB) | 1.00 | |||
Thermal resistance (Note 3) |
ANG-type (when not mounted) |
Rth (j-a)1 | 104 | /W |
AFG-type (on PCB) | 70 | |||
ANG-type (when not mounted) |
Rth (j-a)2 | 140 | ||
AFG-type (on PCB) | 120 | |||
Operating temperature | Topr | −40 to 85 | ||
Storage temperature | Tstg | −55 to 150 |
Note 3: ANG-Type: Powers dissipation is derated by 14.28 mW/°C if device is mounted on PCB and ambient mperature is above 25°C.
AFG-Type: Powers dissipation is derated by 6.67 mW/°C if device is mounted on PCB and ambient emperature is above 25°C.
With device mounted on glass-epoxy PCB of less than 40% Cu and of dimensions 0 mm * 50 mm * 1.6 mm.
The TB62726A series are comprised of constant-current drivers esigned for LEDs and LED displays. The output current value an be set using an external resistor.
As a result, all outputs will have virtually the same current evels.
This driver incorporates 16-bit constant-current outputs, a 16-bit shift register, a 16-bit latch and a 16-bit AND-gate circuit.
These drivers have been designed using the Bi-CMOS process.
This devices are a product for the Pb free.