TB62726AF

· Output current capability and the number of output: 90 mA x 16 outputs
· Constant current range : 2 to 90 mA
· Application output voltage :
  0.7V (output current 2 to 80mA)
  0.4V (output current 2 to 40mA)
· For anode common LED
· Input signal voltage level : 3.3V-5.0V CMOS level (schmitt trigger input)
· Power supply voltage range V_DD=3.0 to 5.5V
· Muximum output terminal voltage 17V
· Serial and parallel data transfer rate 20 MHz (min., Cascade Connection)
· Operation temperature range topr = -40 to 85 degrees
· Package : AN type - - - P-SDIP-300-1.78 AF type - - - P-SSOP24-300-1.00B
· Current accuracy (not used dot-current correction.)

Note 3: AN-type: Powers dissipation is derated by 14.28 mW/degree if device is mounted on PCB and ambient temperature is above 25 degree.

FN-type: Powers dissipation is derated by 6.67 mW/degree if device is mounted on PCB and ambient temperature is above 25 degrees.

With devide monuted on glass-epoxy PCB of less than 40% Cu and of dimensions 50mm x 50 mm x 1.6mm.

The TB62726A series are comprised of constant-current drivers designed for LEDs and LED displays. The output current value can be set using an external resistor. As a result, all outputs will have virtually the same current levels. This driver incorporates 16-bit constant-current outputs, a 16-bit shift register, a 16-bit latch and 16-bit AND-gate circuit. These drivers have been designed using the Bi-CMOS process.