TA8262H

Features:

·High power
   : POUT MAX (1) = 43 W (typ.)
  (V_CC = 14.4 V, JEITA max, RL = 4 Ω)
  : POUT MAX (2) = 40 W (typ.)
   (V_CC = 13.7 V, JEITA max, RL = 4 Ω)
   : POUT (1) = 28 W (typ.)
   (V_CC = 14.4 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
   : POUT (2) = 24 W (typ.)
   (V_CC = 13.2 V, f = 1 kHz, THD = 10%, RL = 4 Ω)
·Built-in clip detector & diagnosis circuit. (pin 25)
·Low distortion ratio
   : THD = 0.02% (typ.)
   (V_CC = 13.2 V, f = 1 kHz, POUT = 5 W, RL = 4 Ω)
·Low noise
   : VNO = 0.10 mVrms (typ.)
   (V_CC = 13.2 V, Rg = 0 Ω, GV = 26dB, BW = 20 Hz~20 kHz)
·Built-in stand-by switch function (pin 2)
·Built-in muting function (pin 24)
·Built-in AUX. amplifier from single input (pin 16) to 2 channels output ; OUT1 and 4
·Built-in various protection circuit
: Thermal shut down, over voltage, out to GND, out to V_CC, out to out short
·Operating supply voltage: V_CC (opr) = 9~18 V


Specifications

Characteristics	Symbol	Rating	Unit
Peak supply voltage (0.2 s)	VCC (surge)	50	V
DC supply voltage	VCC (DC)	25	V
Operating supply voltage	VCC (opr)	18	V
Output current (peak)	IO (peak)	9	A
Power dissipation	PD (Note 1)	250	W
Operating temperature	Topr	−40~85	°C
Storage temperature	Tstg	−55~150	°C

Note 1: Package thermal resistance _j-T = 0.5°C/W (typ.) (T_a = 25°C, with infinite heat sink)


Description

The TA8262H is 4 ch BTL audio power amplifier for car audio application.

This IC can generate more high power: POUT MAX = 43 W as it is included the pure complementary PNP and NPN transistor output stage.

TA8262H is designed low distortion ratio for 4 ch BTL audio power amplifier, built-in Stand-by Function, Muting Function, Clip detector, and diagnosis circuit.

Additionally, the AUX. amplifier is built-in, it can make the beep signal etc. output to 2 channels (OUT1 and 4). TA8262H contains various kind of protectors for car audio use.