DescriptionThe TA4011F is designed as toshiba bipolar linear integrated circuit silicon monolithic for UHF wide band amplifier applications.TA4011F has three features. (1)Low current which would be 3.5mA. (2)Wide band which would be 2.4GHz with 3dB down. (3)Operating supply voltage would be from 1...
TA4011F: DescriptionThe TA4011F is designed as toshiba bipolar linear integrated circuit silicon monolithic for UHF wide band amplifier applications.TA4011F has three features. (1)Low current which would be ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The TA4011F is designed as toshiba bipolar linear integrated circuit silicon monolithic for UHF wide band amplifier applications.
TA4011F has three features. (1)Low current which would be 3.5mA. (2)Wide band which would be 2.4GHz with 3dB down. (3)Operating supply voltage would be from 1.5V to 3V. Those are all the main features.
Some absolute maximum ratings of TA4011F have been concluded into several points as follow. (1)Its supply voltage which would be 3.2V when Vcc is operated at less than 1/4 duty cycle. (2)Its supply voltage would be max 4V when mounted on the glass epoxy of 2.5cm2 x 1.6t. (3)Its total power dissipation would be 300mW. (4)Its operating temperature range would be from -40°C to 85°C. (5)Its storage temperature range would be from -55°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some electrical characteristics on TA4011F are concluded as follow. (1)Its circuit current would be min 2.5mA and typ 3.5mA and max 4.5mA. (2)Its band width would be min 2.2GHz and typ 2.4GHz. (3)Its insertion gain would be min 8dB and typ 10dB. (4)Its noise figure would be typ 6.5dB and max 8dB. (5)Its isolation would be typ -22dB. (6)Its input return loss would be typ -6.5dB. (7)Its output return loss would be typ -5.5dB. (8)Its output power at 1dB gain compression would be typ -6dBmW with conditions of Vcc=2V and f=1.5GHz.
It should be noted that the information contained herein is presented only as a guide for the applications of toshiba products. No responsibility is assumed by toshiba sorporation for any infringements of implication or otherwise under any intellectual property or other rights of toshiba corporation or others. And so on. If you have any question or suggestion or want to know more information about TA4011F please contact us for details. Thank you!