TA1303BFN

The TA1303BFN is a single chip which integrates a PLL and a MIX-OSC for VHF,CATV and UHF band.The control data conforms to 3 wire bus and I2C bus formats.Bus-SW can be used to easily switch for easy tuner system set-up.

Features of the TA1303BFN are:(1)VHF-CATV band is mixer and oscillator;(2)UHF bands is mixer and oscillator;(3)built-in IF amplifier;(4)single IF output terminal;(5)standard bi-directional I2C bus format control;(6)3-wire bus format control;(7)18-bit and 19-bit automatical discrimination circuit (when 3-wire bus selected);(8)tuning amplifier;(9)4-bit bandswitch drive transistor;(10)5-levels A/D convertor (when I2C bus selected);(11)frequency step is 31.5kHz,50kHz, and 62.5kHz (at 4MHz X'tal used);(12)4 programmable chip address(when I2C bus selected);(13)power on resist circuit;(14)1/4 prescaler.

The absolute maximum ratings of the TA1303BFN can be summarized as:(1):the characteristic is MIX-OSC block,the symbol is VCC1,the rating is 6,the unit is V;(2):the characteristic is MIX-OSC block,the symbol is fIN,the rating is 120,the unit is dBV;(3):the characteristic is pLL block,the symbol is Vcc2,the rating is 6,the unit is V;(4):the characteristic is PLL block,the symbol is TVcc3,the rating is 12,the unit is V;(5):the characteristic is PLL block,the symbol is TBT,the rating is 38,the unit is V;(6):the characteristic is power dissipation,the symbol is 780,the rating is 12,the unit is V;(7):the characteristic is operating temperature range,the symbol is Topr,the rating is -20 to +85,the unit is mW;(8):the characteristic is storage temperature,the symbol is Tstg,the rating is -55 to +150,the unit is .