Features: SpecificationsDescriptionThe features of T5711 are low noise, linear regulation, low profile 0.38 inch high, six-sided shield, Pi input filter, short circuit protected. And this series of Industry standard 4.5 watt DO/DC converters provides 4.5 watts of clean, well-regulated output power. All 10 dual output models in the A Series offer 500 VDC minimum isolation with only 1.0 mV RMS (40 mV P-P) output ripple and noise. Otherpremium performance features include line and load regulation of and efficiencies to 69%. All A Series units are housed in a compact 2*2 inches package with low 0.38 inch vertical profile. The copper case provides optimum thermal conductivity, low themwal gradients, and six-sided shielding for EMl/RFI suppression. Noise containment is further enhanced by transformer shielding and a Pi-type input filter to minimize reflected input ripple current. Other important features include: output voltage accuracy within 1%, output short circuit protection; ±0.01% temperature coefficient; and -25 to +71 operating temperature range with no derating.
For T5711 all specifications typical at nominal line, full load and 25 unless otherwise noted. And the output specifications of T5711 are Voltage Accuracy, output=±1.0% max. Voltage Balance, -output=±1.0% max. Ripple and Noise, 20 MHz BW=1 mV RMS, max./40 mV P-P, max. Temperature Coefficient=±1.0%/ max. Voltage Stability, Transient Recovery Time, ±0.1% Error Band NL-FL=50 sec., max. Short-Circuit Protection - Either Output to Common Short-Circuit Current Limit 150% Iout. The Input Voltage Range See Table Below, Input Filter(Pi Network), Switching Frequency(20 kHz), Power Restart(Automatic). Efficiency See Table, Isolation Voltage(500 VDC, min. ), Isolation Resistance(10°ohms, min.).
The physical specifications of T5711 are Weight=3.5oz., Case Material(black coated copper with non-conductive base), Mating Socket(MS-Z).
T5711 Data Sheet
