Specifications ITEM SYMBOL MIN MAX UNIT COMMENT Power Supply for Logic VDD-VSS 0 6.0 V Contrast Adjustment Voltage VCON-VSS 0 VDD V Input Voltage Vi -0.3 VDD+0.3 V Note 1 Input Current Ii 0 1 A Static Electricity - - - - Note 2Note 1 DISP OFF, ...
SX21V001-Z4A: Specifications ITEM SYMBOL MIN MAX UNIT COMMENT Power Supply for Logic VDD-VSS 0 6.0 V Contrast Adjustment Voltage VCON-VSS 0 VDD V Input Voltage Vi -0.3 VDD+0.3 V...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
ITEM | SYMBOL | MIN | MAX | UNIT | COMMENT |
Power Supply for Logic | VDD-VSS | 0 | 6.0 | V | |
Contrast Adjustment Voltage | VCON-VSS | 0 | VDD | V | |
Input Voltage | Vi | -0.3 | VDD+0.3 | V | Note 1 |
Input Current | Ii | 0 | 1 | A | |
Static Electricity | - | - | - | - | Note 2 |
ITEM | SPECIFICATION | NOTE |
Voltage | (7VDC) (MAX) | |
Current | (25mA) (max) |
TEM | OPERATING | STORAGE | COMMENT | ||
MIN | MAX | MIN | MAX | ||
Ambient Temperature | 5°C | 40°C | -20°C | 60°C | Note 2, 3 |
Humidity | Note 1 | Note 1 | Without condensation | ||
Vibration | - | 2.45 m/s2 (2.45G) |
- | 11.76 m/s2 (1.2G) Note 5 |
Note 4 |
Shock | - | 29.4 m/s2 (3G) |
- | 490 m/s2 (50G) Note 5 |
XYZ directions 11 |
Corrosive Gas | Not Acceptable | Not Acceptable |
Note 1 Ta40°C : 85%RH max. Ta>40°C : Absolute humidity must be lower than the humidity of 85%RH at 40°C.
Note 2 Ta at -20°C ---------- <48h, at 60°C ---------- <168h
Note 3 Background color changes slightly depending on ambient temperature. This phenomenon is reversible.
Note 4 5Hz~100Hz (Except resonance frequency)
Note 5 This module should be operated normally af ter finish the test.
Note 6 When LCM is operated at 5°C, the life time of CFL will be reduced. Need to make sure of value of IL and characteristics of inverter.
Also the response time at 5°C will be slower.