SW06

Two Normally Open and Two Normally Closed SPST Switches with Disable
Switches Can Be Easily Configured as a Dual SPDT or a DPDT
Highly Resistant to Static Discharge Destruction
Higher Resistance to Radiation than Analog Switches
Designed with MOS Devices
Guaranteed RON Matching: 10% max
Guaranteed Switching Speeds
   TON = 500 ns max
   TOFF = 400 ns max
Guaranteed Break-Before-Make Switching
Low "ON" Resistance: 80 V max
Low RON Variation from Analog Input Voltage: 5%
Low Total Harmonic Distortion: 0.01%
Low Leakage Currents at High Temperature
   TA = +1258C: 100 nA max
   TA = +858C: 30 nA max
Digital Inputs TTL/CMOS Compatible and Independent of V+
Improved Specifications and Pin Compatible to LF-11333/13333
Dual or Single Power Supply Operation Available in Die Form

The SW06 is a four channel single-pole, single-throw analog switch that employs both bipolar and ion-implanted FET devices. The SW06 FET switches use bipolar digital logic inputs which are more resistant to static electricity than CMOS devices. Ruggedness and reliability are inherent in the SW06 design and
construction technology.

Increased reliability is complemented by excellent electrical specifications. Potential error sources are reduced by minimizing "ON" resistance and controlling leakage currents at high temperatures. The switching FET exhibits minimal RON variation over a 20 V analog signal range and with power supply voltage changes. Operation from a single positive power supply voltage is possible. With V+ = 36 V, V = 0 V, the analog signal range will extend from ground to +32 V.

PNP logic inputs are TTL and CMOS compatible to allow the SW06 to upgrade existing designs. The logic "0" and logic "1" input currents are at microampere levels reducing loading on CMOS and TTL logic.