Series: -
Function: Modulator
Noise Floor: -156dBm/Hz
Manufacturer: RFMD
LO Frequency: 700MHz ~ 2.5GHz
RF Frequency: 700MHz ~ 2.5GHz
P1dB: 3dBm
Output Power: -11.5dBm
Current - Supply: 86mA
Voltage - Supply: 4.75 V ~ 5.25 V
Test Frequency: 1.7GHz
Package / Case: 16-TSSOP (0.173", 4.40mm Width) Exposed pad
Packaging: Tape & Reel (TR)
Features: • Excellent carrier feedthrough, -40 dBm
• Wide baseband input, DC - 500 MHz
• Superb phase accuracy and amplitude balance, ±0.5 deg./±0.2 dB
• No external IF filter required
• Very low noise floor, -155 dBm/Hz
• Low LO drive requirement, -5 dBm
• Single +5 volt supply with digital shut-downApplication• Cellular/PCS/CDMA2000/UMTS transceivers
• ISM band transceivers, 900 & 2400 MHz
• GMSK, QPSK, QAM, SSB modulatorsPinout
Specifications
|
Parameters |
Value |
Unit |
| Supply Voltage (VCC) |
6.0 |
VDC |
| LO, RF Input (LOP, LON, RFP, RFN) |
+10 |
dBm |
Baseband Min Input Voltage
(BBIP, BBIN, BBQP, BBQN) |
0 |
VDC |
Baseband Max Input Voltage
(BBIP, BBIN, BBQP, BBQN) |
3 |
VDC |
| Operating Temperature |
-40 to +85 |
|
| Storage Temperature |
-65 to +150 |
|
DescriptionThe Sirenza Microdevices' STQ-2016 is a direct quadrature modulator targeted for use in a wide range of communications systems, including cellular/PCS, CDMA2000, UMTS, and ISM datacom. This device features a wide 700-2500 MHz operating frequency band, excellent carrier and sideband suppression, and a low broadband noise floor.
The STQ-2016 uses silicon germanium (SiGe) device technology and delivers a typical output power of -11dBm with greater than 60dB IM3 suppression. A digital input shut-down feature is included that, when enabled, attenuates the output by 60dB. The device is packaged in an industry standard 16 pin TSSOP with exposed paddle for superb RF and thermal ground.
STQ-2016 Data Sheet
