ST6200L

Features: ` 2.4 to 3.9V Supply Operating Range` 4 MHz Maximum Clock Frequency` 0 to +70°C Operating Temperature Range` Run, Wait and Stop Modes` Look-up Table capability in Program Memory` Data Storage in Program Memory: User selectable size` Data RAM: 64bytes` 9 I/O pins, fully programmable as: ...

product image

ST6200L Picture
SeekIC No. : 004506577 Detail

ST6200L: Features: ` 2.4 to 3.9V Supply Operating Range` 4 MHz Maximum Clock Frequency` 0 to +70°C Operating Temperature Range` Run, Wait and Stop Modes` Look-up Table capability in Program Memory` Data Stor...

floor Price/Ceiling Price

Part Number:
ST6200L
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/22

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

2.4 to 3.9V Supply Operating Range
4 MHz Maximum Clock Frequency
0 to +70°C Operating Temperature Range
Run, Wait and Stop Modes
Look-up Table capability in Program Memory
Data Storage in Program Memory: User selectable size
Data RAM: 64bytes
9 I/O pins, fully programmable as:
   Input with pull-up resistor
   Input without pull-up resistor
   Input with interrupt generation
   Open-drain or push-pull output
   Analog Input (except ST6203L)
3 I/O lines can sink up to 12mA to drive LEDs
8-bit Timer/Counter with 7-bit programmable prescaler
Digital Watchdog
8-bit A/D Converter with up to 4 analog inputs
On-chip Clock oscillator can be driven byQuartz
   Crystal Ceramic resonator or RC network
Power-on Reset
One external Non-Maskable Interrupt
ST626x-EMU2 Emulation and Development
   System (connects to an MS-DOS PC via an RS232 serial line)



Specifications

This product contains devices to protect the inputs against damage due to high static voltages, however it is advisable to take normal precaution to avoid application of any voltage higher than the specified maximum rated voltages.

For proper operation it is recommended that VI and VO be higher than VSS and lower than VDD. Reliability is enhanced if unused inputs are connected to an appropriate logic voltage level (VDD
or VSS).

Power Considerations.The average chip-junction temperature, Tj, in Celsius can be obtained from:
Tj=TA + PD x RthJA
Where:TA = Ambient Temperature.
RthJA =Package thermal resistance(junction- to ambient).
PD = Pint + Pport.
Pint =IDD x VDD (chip internal power).
Pport =Port power dissipation (determined by the user).

Symbol Parameter
Value
Unit
VDD Supply Voltage
-0.3 to 7.0
V
VI Input Voltage
VSS - 0.3 to VDD + 0.3(1)
V
VO Output Voltage
VSS - 0.3 to VDD + 0.3(1)
V
IO Current Drain per Pin Excluding VDD, VSS
±10
mA
IVDD Total Current into VDD (source)
50
mA
IVSS Total Current out of VSS (sink)
50
mA
TJ Junction Temperature
150
TSTG Storage Temperature
-60 to 150
Notes:
- Stresses above those listed as "absolute maximum ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
- (1) Within these limits ,clamping diodes are guarantee to be not conductive. Voltages outside these limits are authorised as long as injection current is kept within the specification.



Description

The ST6200L/01L and 03L are low voltage mask programmed ROM version of ST62T00C,T01C and T03C OTP devices.

They offer the same functionality as OTP devices, selecting as ROM options the options defined in the programmable option byte of the OTP version, with the exception of the LVD Reset and the OSG that are not available.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Sensors, Transducers
Crystals and Oscillators
Optoelectronics
Boxes, Enclosures, Racks
View more