Features: • Ideal for:- constant density recording applications- magnetic tape recording• Programmable filter cutoff frequency (ƒc = 250 kHz to 2.5 MHz)• Programmable high frequency peaking (0 to 9 dB boost at the filter cutoff frequency)• Matched normal and differenti...
SSI32F8030: Features: • Ideal for:- constant density recording applications- magnetic tape recording• Programmable filter cutoff frequency (ƒc = 250 kHz to 2.5 MHz)• Programmable high fre...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETER |
RATING |
Storage Temperature Junction Operating Temperature, Tj Supply Voltage, VCC1, VCC2 Voltage Applied to Inputs IFP, VFP Inputs Maximum Current |
-65 to +150°C +130°C -0.5 to 7V -0.5 to VCC + 0.5V 1.2 mA |
The SSI 32F8030 Programmable Electronic Filter provides an electronically controlled lowpass filter with a separate differentiated lowpass output. A seven pole, 0.05° Equiripple-type linear phase, lowpass filter is provided along with a single-pole, single-zero differentiator. Both outputs have matched delays. The delay matching of SSI 32F8030 is unaffected by any amount of programmed high frequency peaking (boost) or bandwidth. This programability, combined with low group delay variation makes the SSI 32F8030 ideal for use in many applications. Double differentiation high frequency boost is accomplished by a twopole, low pass with a twopole, highpass feed forward section to provide complementary real axis zeros. A variable attenuator is used to program the zero locations, which controls the amount of boost.
The SSI 32F8030 programmable boost and bandwidth characteristics can be controlled by external DACs or DACs provided in the SSI 32D4661 Time Base Generator. Fixed characteristics are easily accomplished with three external resistors. In addition, boost can be witched in or out by a logic signal.
The SSI 32F8030 requires only a +5V supply and is available in 16-Lead SON, and SOL packages.