SS561AT

Operating Point Min/Max :
Release Point Min/Max (Brp) :
Maximum Output Current : 20 mA
Maximum Operating Temperature : + 150 C
Mounting Style : SMD/SMT
Operating Supply Voltage : 5 V, 9 V, 12 V
Supply Current : 8.7 mA
Package / Case : SOT-89
Type : Latching Hall-Effect Sensor


Features:

• Wide temperature and voltage ranges for design flexibility and harsh (automotive)environments.
• Temperature compensated for consistent operation with low-cost magnets (SS500).
• SS5 Package is resistant to thermal and mechanical stress.
• SS5 profile is lower than other SOT-89 packages. This allows the customer to reduce the total gap.
• Industry standard "gull-wing" design. Less susceptibility to "solder bridging". Allows increased circuit board density.
• Bipolar, unipolar and latching magnetics.
• Low Gauss versions available for high accuracy or wide gap applications.
• SS5 package allows 4-pin package designs


Application

• Brushless DC motors
• Digital current sensor
• Anti-skid braking sensor
• Piston detection in hydraulic cylinder
• Valve position sensing
• Cam, lever, shaft position sensing
• Tachometer, counter pickup
• Push-button sensor
• Disk speed, tape rotation, flow rate sensing
• Speed sensing - rate, under, over speed
• Remote reading sensor
• Magnetic card reader


Specifications

Catalog Listing                                                             SS51T                                                        SS500

Supply Voltage                                                             -28 to +28 VDC                                      -1 to +30 VDC

Voltage externally applied to output                                                         +28 c ondition only)                                +30 VDC max. (OFFcondition only)                                                                                      -0.5 VDC min. (OFF or N                                                                                      condition) +30 VDC max. (OFF                                                                                      condition only)

Output ON Current                                                      20 mA max.                                                   50 mA max.

Temperature Limits                 Operating                      Storage                                                 -40 to +150°C (-40 to                         -50 to +160°C (-46 to                                                                                    +302°F)                                              +320°F)                                                                                    -40 to +150°C (-40 to                                                                                   +302°F) -50 to +160°C (-46 to           -65 to +160°C (-54 to                                                                                                        +320°F)                                                                                   -65 to +160°C (-54 to                          +320°F                                                                                   +320°F

Magnetic Flux                                                           No limit. Circuit cannot be                                                                                 damaged by magnetic                                No limit. Circuit cannot be                                                                                                                                                     damaged by magnetic                                                                              overdrive.                                                                                                                                                      overdrive.

Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability.

Description

SS5 Series Hall effect position sensors are operated by the magnetic field from a permanent magnet or electromagnet. The small SOT89 style package surface mounts on PC boards and flexible circuits. The SS5 uses a industry standard "gull-wing" design which makes it less susceptible to "solder bridging" and allows increased circuit board density. The SS5 series package can accommodate larger IC's than SS1 and allows for fourpin designs.

The integrated circuits of SS5 Series are designed to provide predictable performance over the full temperature range of -40 to +150°C. Bipolar, unipolar and latching magnetics are available. The SS5 has the same footprint and pinout as the industry standard SOT-89. It will replace Honeywell SS1 Series and any equivalent SOT-89 sensors from other suppliers with minimum or no design changes.

On-board regulation provides extremely stable operation over the full supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500). Current consumption is a low 10 mA maximum at 40°C and is typically 7mA or less at room temperature and above. SS5 sensors are capable of continuous 20 mA sinking output, and can withstand temporary current as high as 20 mA maximum (SS51T) or 50 mA maximum (SS500). SS5 Series can use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or compensation circuitry.

SS5 Series sensors are supplied on tape and reel for high-volume, automated pick and place equipment. Each reel contains 1,000 sensors. MICRO SWITCH supplies bar and ring magnets for operating Hall effect sensors. Bar magnets of SS5 Series can operate any Hall effect sensor. Ring magnets are magnetized on the outside diameter with alternating North and South poles. They are particularly useful with bipolar sensors and rpm measurement.

Parameters:

Technical/Catalog Information	SS561AT
Vendor	Honeywell Sensing and Control
Category	Sensors, Transducers
Features	-
Package / Case	SOT-89
Current - Output (Max)	20mA
Sensing Range	85G Trip, -85G Release
Operating Temperature	-40°C ~ 150°C
Output Type	-
Type	Digital Bipolar Latch
Voltage - Supply	3.8 V ~ 30 V
Current - Supply	8.7mA
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	SS561AT SS561AT 480 2013 2 ND 48020132ND 480-2013-2