Features: Memory configuration
OTP ROM size: 1K * 16 bits.
RAM size: 64 * 8 bits.
I/O pin configuration (Total 12 pins)
Input only: P0
Bi-directional: P1, P4, P5
Wakeup: P0, P1
Pull-up resisters: P0, P1, P4, P5
External interrupt: P0
P4 pins shared with ADC inputs.
One 8-bit timer counters. (TC0).
On chip watchdog timer.
Eight levels stack buffer.
59 powerful instructions
Four clocks per instruction cycle
All of instructions are one word length.
Most of instructions are one cycle only.
All ROM area lookup table function (MOVC)♦ Two interrupt sources
One internal interrupts: TC0.
One external interrupts: INT0.
An 4-channel ADC with 8-bit/12-bit resolution
One channel PWM output. (PWM0)
One channel Buzzer output. (BZ0)
Dual clock system offers three operating modes
External high clock: RC type up to 10 MHz
External high clock: Crystal type up to 16 MHz
Internal low clock: RC type 16KHz(3V), 32KHz(5V)
Normal mode: Both high and low clock active
Slow mode: Low clock only
Sleep mode: Both high and low clock stop
Package (Chip form support)
PDIP 18 pins
SOP 18 pins / SSOP20 (MASK type only)Pinout
Specifications(All of the voltages referenced to Vss)
Supply voltage (Vdd)............................... - 0.3V ~ 6.0V
Input in voltage (Vin)...........................Vss - 0.2V ~ Vdd + 0.2V
Operating ambient temperature (Topr).....................-20°C ~ + 70°C
Storage ambient temperature (Tstor)....................-30°C ~ + 125°C
Power consumption (Pc)..................................500 mWDescriptionThe SN8P1700 is a series of 8-bit micro-controller including SN8P1702, SN8P1704, SN8P1706, SN8P1707 and SN8P1708. This series is utilized with CMOS technology fabrication and featured with low power consumption and high performance by its unique electronic structure.
These chips SN8P1702 are designed with the excellent IC structure including the large program memory OTP ROM, the massive data memory RAM, one 8-bit basic timer (T0), two 8-bit timer counters (TC0, TC1), a watchdog timer, up to seven interrupt sources (T0, TC0, TC1, SIO, INT0, INT1, INT2), a 7-bit DAC converter, an 8-channel ADC converter with 8-bit/12-bit resolution, two channel PWM output (PWM0, PWM1), tw0 channel buzzer output (BZ0, BZ1) and 8-level stack buffers. Besides, the user can choose desired oscillator configurations for the controller. There are four oscillator configurations to select for generating system clock, including High/Low Speed crystal, ceramic resonator or cost-saving RC. SN8P1702 series also includes an internal RC oscillator for slow mode controlled by programming.
SN8P1702 Data Sheet
