SN75176

The SN75176 is designed as differential bus transceiver which is a monolithic integrated circuit for bidirectional data communication on multipoint bus-transmission lines. It combines a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be externally connected together to function as a direction control.

SN75176 has many features and some are listed here. The first one is it would be bidirectional transceiver. The second one is it meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and ITU recommendation V.11. The third one is it is designed for multipoint transmission on long bus lines in noisy environments. The fourth one is it would have 3-state driver and receiver outputs. The fifth one is individual driver and receiver enables. The sixth one is wide positive and negative input/output bus voltage ranges. The seventh one is its driver output capability would be ±60mA max. The eighth one is thermal-shutdown protection. The ninth one is driver positive- and negative-current limiting.

Some SN75176 absolute maximum ratings have been concluded into several points as follow. Its supply voltage would be 7V. Its voltage range at any bus terminal would be from -10V to 15V. Its enable input voltage would be 5.5V. Its operating free-air temperature range would be from 0°C to 70°C. Its storage temperature range would be from -65°C to 150°C. Its lead temperature 1.6mm (1/16 inch) from case for 10 seconds would be 260°C.SN75176 should be noted that stresses beyond those listed under ''absolute maximum ratings'' may cause permanent damage to the device. Exposure to absolute maximum rated conditions for extended periods may affect device reliability. And so on. If you have any question or suggestion or want know more information please contact us for details. Thank you!