DescriptionThe SM5803AP is a multi-function digital filter for digital audio fabricated using NPC's original molybdenum-gate CMOS technology. This LSI uses a variety of functions including 4-times/8-times oversampling, digital de-emphasis, digital attenuator, fitter-free mechanism and soft mute.Th...
SM5803AP: DescriptionThe SM5803AP is a multi-function digital filter for digital audio fabricated using NPC's original molybdenum-gate CMOS technology. This LSI uses a variety of functions including 4-times/8...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The SM5803AP is a multi-function digital filter for digital audio fabricated using NPC's original molybdenum-gate CMOS technology. This LSI uses a variety of functions including 4-times/8-times oversampling, digital de-emphasis, digital attenuator, fitter-free mechanism and soft mute.The 1/O interface allows 16- or 18-bit input data and 16-,18- or 20-bit output data, so a wide range of system configurations can be realized.
Features of the SM5803AP are:(1)noise shaper (can be turned on or off) reduction of requantization noise component in the audio band; (2)soft mute:smooth changes of attenuation level; (3)digital attenuation; (4)high-precision operation by 25-bit accumulator; (5)digital attenuation; (6)built-in overflow limiter; (7)built-in quartz oscillator circuitry.The IIR achieves aimvst ideal gain and phase characteristics, so there is no distortion and variativn due to component parameters. The primary objective of de-emphasis is to reduce quantizativn noise in the high-frequency band and widen the dynamic range. However, de-emphasis in the digital stage narrows the dynamic range.
The absolute maximum ratings of the SM5803AP can be summarized as:(1)soldering temperature:255 ;(2)storage temperature range:-40 to 125;(3)soldering time:10 sec;(4)power dissipation:250 mW;(5)supply voltage:-0.3 to 7.0V;(6)input voltage:-0.3 to Vdd+0.3V.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite).