Features: • Data EEPROM internally organized as 128/256 bytes and 16/32 pages * 8 bytes• Page protection mode, flexible page-by-page hardware write protection Additional protection EEPROM of 16/32 bits,1 bit per data page Protection setting for each data page by writing its protection ...
SLx24C02: Features: • Data EEPROM internally organized as 128/256 bytes and 16/32 pages * 8 bytes• Page protection mode, flexible page-by-page hardware write protection Additional protection EEPRO...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Stresses above those listed here may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this data sheet is not implied.Exposure to absolute maximum ratings for extended periods may affect device reliability.
Parameter |
Limit Values |
Unit |
Operating temperature range 1 (industrial) range 2 (automotive) |
40 to + 85 40 to + 125 |
°C °C |
Storage temperature |
65 to + 150 |
°C |
Supply voltage |
0.3 to + 7.0 |
V |
All inputs and outputs with respect to ground |
0.3 to VCC + 0.5 |
V |
ESD protection (human body model) |
4000 |
V |
The SLx 24C01/02/P device is a serial electrically erasable and programmable read only memory (EEPROM), organized as 128/256 ´ 8 bit. The data memory is divided into 16/ 32 pages. The 8 bytes of a page can be programmed simultaneously. Each page may be protected individually against changes by its associated protection bit.
The device SLx 24C01/02/P conforms to the specification of the 2-wire serial I2C-Bus. Low voltage design permits operation down to 2.7 V with low active and standby currents.
The device SLx 24C01/02/P operates at 5.0 V ± 10% with a maximum clock frequency of 400 kHz and at 2.7 ... 4.5 V with a maximum clock frequency of 100 kHz. The device with a voltage range of 2.7 . 5.5. V is available in two temperature ranges for industrial and automotive applications. The EEPROMs are mounted in eight-pin DIP and DSO packages or are also supplied as chips.