Features: • Data EEPROM internally organized as 512 bytes and 32 pages *16 bytes• Low power CMOS• VCC = 2.7 to 5.5 V operation• Two wire serial interface bus,I2C-Bus compatible• Filtered inputs for noise suppression with Schmitt trigger• Clock frequency up to 40...
SLA24C04-S: Features: • Data EEPROM internally organized as 512 bytes and 32 pages *16 bytes• Low power CMOS• VCC = 2.7 to 5.5 V operation• Two wire serial interface bus,I2C-Bus compatib...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Stresses above those listed here may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this data sheet is not implied.Exposure to absolute maximum ratings for extended periods may affect device reliability.
Parameter |
Limit Values |
Unit |
Operating temperature range 1 (industrial) range 2 (automotive) |
40 to + 85 40 to + 125 |
°C °C |
Storage temperature |
65 to + 150 |
°C |
Supply voltage |
0.3 to + 7.0 |
V |
All inputs and outputs with respect to ground |
0.3 to VCC + 0.5 |
V |
ESD protection (human body model) |
4000 |
V |
The SLA24C04-S device is a serial electrically erasable and programmable read only memory (EEPROM), organized as 512 * 8 bit. The data memory is divided into 32 pages. The 16 bytes of a page can be programmed simultaneously.
The SLA24C04-S conforms to the specification of the 2-wire serial I2C-Bus. Low voltage design permits operation down to 2.7 V with low active and standby currents.
The SLA24C04-S operates at 5.0 V ± 10% with a maximum clock frequency of 400 kHz and at 2.7 ... 4.5 V with a maximum clock frequency of 100 kHz. The device with a voltage range of 2.7 . 5.5. V is available in two temperature ranges for industrial and automotive applications. The EEPROMs are mounted in eight-pin DIP and DSO packages or are also supplied as chips.