Features: • Drop-in Replacements for MAX4051/A, MAX4052/A and MAX4053/A• Pin Compatible with MAX4581, MAX4582, MAX4583 and with Industry Standard 74HC4051, 74HC4052 and74HC4053• ON Resistance (RON) Max, VS = ±5V . . . . . . . . . . . 100• ON Resistance (RON) Max, VS = +3V ....
SL84053: Features: • Drop-in Replacements for MAX4051/A, MAX4052/A and MAX4053/A• Pin Compatible with MAX4581, MAX4582, MAX4583 and with Industry Standard 74HC4051, 74HC4052 and74HC4053• ON...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
• Drop-in Replacements for MAX4051/A, MAX4052/A and MAX4053/A
• Pin Compatible with MAX4581, MAX4582, MAX4583 and with Industry Standard 74HC4051, 74HC4052 and
74HC4053
• ON Resistance (RON) Max, VS = ±5V . . . . . . . . . . . 100
• ON Resistance (RON) Max, VS = +3V . . . . . . . . . . . 525
• RON Matching Between Channels . . . . . . . . . . . . . . <6
• Low Charge Injection . . . . . . . . . . . . . . . . . . 10pC (Max)
• Single Supply Operation. . . . . . . . . . . . . . . +2V to +12V
• Dual Supply Operation . . . . . . . . . . . . .. . . . . ±2V to ±6
• Fast Switching Action (VS = +5V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60ns
• Guaranteed Max Off-leakage @ VS = ±5V. . . . . . . . 5nA
• Guaranteed Break-Before-Make
• TTL, CMOS Compatible
• Pb-free available
V+ to V- . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . -0.3 to15V
V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to15V
V- to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15 to 0.3V
Input Voltages
INH, NO, NC, ADD (Note 2) . . . . . .. . . ((V-)-0.3) to ((V+) + 0.3V)
Output Voltages
COM (Note 2) . . . . . . . . . . . . . . . . . .. ((V-)-0.3) to ((V+) + 0.3V)
Continuous Current (Any Terminal) . . . . . . . . . . .. . . . . . ±30mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . ±100mA
ESD Rating
HBM (Per MIL-STD-883, Method 3015.7) . . . . . . . . . . . . . . >2kV
Thermal Resistance (Typical, Note 3) JA (o C/W)
16 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
16 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Maximum Junction Temperature (Plastic Package) . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . 300oC
(Lead Tips Only)
Operating Conditions
Temperature Range
ISL8405XIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
2. Signals on NC, NO, COM, ADD, or INH exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maximum current ratings.
3. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
The Intersil ISL84051, ISL84052, ISL84053 devices are precision, bidirectional, analog switches configured as a 8 channel multiplexer/demultiplexer (ISL84051), a dual differential 4 channel multiplexer/demultiplexer (ISL84052) and a triple single pole/double throw (SPDT) switch (ISL84053) designed to operate from a single +2V to +12V supply or from a ±2V to ±6V supply. All devices have an inhibit pin to simultaneously open all signal paths.
ON resistance of the SL84053 is 60 with a ±5V supply and 125 with a single +5V supply. Each switch can handle rail to rail analog signals. The off-leakage current is only 0.1nA at +25oC or 5nA at +85oC with a ±5V supply.
All digital inputs have 0.8V to 2.4V logic thresholds, ensuring TTL/CMOS logic compatibility when using a single +3.3V and +5V supply or dual ±5V supplies.
The SL84053 is a 8 to 1 multiplexer device. The ISL84052 is a dual 4 to 1 multiplexer device. The ISL84053 is a committed triple SPDT, which is perfect for use in 2-to-1 multiplexer applications.