Features: • Bipolar IC with open-collector output• Digital output, TTL compatible• Sensitive in visible and near IR range• Low switching threshold• Transfer rate 5 Mbit/s • 2.2 mm aperture holds standard 1000 micron plastic fiber• No fiber stripping requi...
SFH551-1: Features: • Bipolar IC with open-collector output• Digital output, TTL compatible• Sensitive in visible and near IR range• Low switching threshold• Transfer rate 5 Mbi...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • IC with monolithic integrated photodiode (singlehip solution)• Especially ...
Parameter |
Symbol |
Limit Values |
Unit | |
min. | max. | |||
Operating Temperature Range | TOP | 40 | +85 | °C |
Storage Temperature Range | TSTG | 40 | +100 | °C |
Soldering Temperature (2 mm from case bottom, t 5 s) |
TS | 260 | °C | |
Supply Voltage Range without Damage | VCC | 0.5 | 15 | V |
Recommended and Guaranteed Maximum Voltage |
5.5 | V | ||
Minimum Supply Voltage for Function | VCCmin | 4 | V | |
Minimum Pull-up Resistance (VCC = 5 V) |
Routmin | 330 | ||
Output Voltage | V0 | 0.5 | 15 | V |
Output Current | I0 | 50 | mA | |
Power Dissipation (output) | P0 | 100 | mW |
The SFH551-1 is a transimpedance amplifier with digital TTL open collector output stage and integrated photodiode. The active area of the detector in connection with the molded microlens gives an efficient coupling from the end of a plastic fiber. The receiver of SFH551-1 is fully DC coupled and therefore no line code is needed. The SFH551/1V includes a Schmitt trigger function to provide stable output states over the whole dynamic range. For optical input power levels above 6 W typically the electrical output will be logical "low" and vice versa. With noise free Vcc and GND no undefined output signal is possible. SFH551-1 must not be used without shielding the ambient light, because ambient light causes malfunction when reaching the threshold level, noise or complete switching the output. Interference free transmission is possible by using the SFH551-1 with the black plastic connector housing.