Features: ·Superfast recovery times·Low forward voltage, high current capability·Hermetically sealed·Low leakage·High surge capability·Plastic package has Underwriters LaboratoriesFlammability classification 94V-0 utilizingFlame retardant epoxy molding compoundSpecificationsRatings at 25 ambient t...
SF308: Features: ·Superfast recovery times·Low forward voltage, high current capability·Hermetically sealed·Low leakage·High surge capability·Plastic package has Underwriters LaboratoriesFlammability class...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
RATINGS |
Symbols |
SF301 |
SF302 | SF303 | SF304 | SF305 | SF306 | SF307 |
SF308 |
Units |
Maximum repetitive peakreverse voltage |
VRRM
|
50 |
100 |
150 |
200 |
300 |
400 |
600 |
800 |
V |
Maximum RMS volts |
VRMS |
35 |
70 |
105 |
140 |
210 |
280 |
420 |
560 |
V |
Maximum DC Blocking Voltage |
VDC |
50 |
100 |
150 |
200 |
300 |
400 |
600 |
800 |
V |
Maximum average forward current 0.375" (9.5mm) lead length at TA=55 |
I(AV) |
3.0 |
A | |||||||
Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) |
IFSM |
125.0 |
A | |||||||
Maximum forward voltage at 3.0A DC |
VF |
0.95
|
1.25 | 1.40 |
V | |||||
Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 |
IR |
5.0 400.0 |
A | |||||||
Maximum reverse recovery time (Note 1) |
Trr |
35.0
|
ns | |||||||
Typical junction capacitance (Note 2) |
Cj |
95.0 |
pF | |||||||
Typical thermal resistance (Note 3) |
RJA |
20.0 |
/W | |||||||
Operating and storage temperature range |
TJ,TSTG |
-55to+150 |
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC
(3) Thermal resistance from junction to ambient and from junction to lead length 0.375" (9.5mm) P.C.B. mounted