Features: `Built-in data display RAM 36 characters + 4 user defined characters + 120 symbols.`CG ROM (For up to 256 characters), CG RAM (for 4 characters) and symbol register (for 120 symbols).`No. of display digit and lines< In normal mode > (1) (12 digits + 4 segments for signal) * 3 line...
SED1220: Features: `Built-in data display RAM 36 characters + 4 user defined characters + 120 symbols.`CG ROM (For up to 256 characters), CG RAM (for 4 characters) and symbol register (for 120 symbols).`No....
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·Low Reverse Leakage·Low Forward Voltage Drop·Hermetically Sealed Power Surface Mount Pa...
| Rating | Symbol | Value | Unit | |
| Power supply voltage (1) | VSS | 6.0 to +0.3 | V | |
| Power supply voltage (2) | V5 | 6.0 to +0.3 | V | |
| Power supply voltage (3) | V1, V2, V3, V4 | V5 to +0.3 | V | |
| Input voltage | VIN | VSS0.3 to +0.3 | V | |
| Output voltage | VO | VSS0.3 to +0.3 | V | |
| Operating temperature | Topr | 30 to +85 | °C | |
| Storage temperature | TCP | Tstr | 55 to +100 | °C |
| Bare chip | 65 to +125 | |||
Notes: 1. All the voltage values are based on VDD = 0 V.
2. For voltages of V1, V2, V3 and V4, keep the condition of VDD V1 V2 V3 V4V5 and VDDVSSV5 VOUT at all times.
3. If the LSI is used exceeding the absolute maximum ratings, it may lead to permanent destruction.
In ordinary operation, it is desirable to use the LSI in the condition of electrical characteristics. If the LSIis used out of this condition, it may cause a malfunction of the LSI and have a bad effect on the reliability of the LSI.
SED1220 is a dot matrix LCD controller/driver for character display. Using 4bits data, 8bits data or serial data being provided from the micro computer, it displays up to 24 characters, 4 user defined characters and up to 120 symbols. Up to 256 types of built-in character generator ROMs are prepared. Each character font is consisted of 5 ´ 8 dots. It also contains the RAM for displaying 4 user defined characters each font consisting of 5 ´ 8 dots. It is symbol register allows character display with high degree of freedom. This handy equipment can be operated with minimum power consumption with its low power consumption design, standby and sleeping mode.