SCD55100

Features:

• Ten 0.145" (3.68 mm) 5x5 dot matrix characters in red, yellow, high efficiency red, green, or high efficiency green
• Optimum display surface efficiency (display area to package ratio)
• Low power30% less power dissipation than 5x7 format
• High speed data input rate: 5 MHz
• ROMless serial input, dot addressable display ideal for user defined characters
• Built-in decoders, multiplexers and LED drivers
• Readable from 6 feet (1.8 meters)
• Wide viewing angle, X axis ±55°, Y axis ±65°
• Attributes
   200 bit RAM for user defined characters
  Eight dimming levels
  Power down mode (<250 mW)
  Hardware/software clear function
  Lamp test
• Internal or external clock
• End-stackable dual-in-line plastic package
• 3.3 V capability

Specifications

DC Supply Voltage .....................................................0.5 to +7.0 Vdc
Input Voltage Levels Relative
to Ground.............................................................0.5 toVCC+0.5 Vdc
Operating Temperature .......................................... 40°C to +85°C
Storage Temperature ............................................ 40°C to +100°C
Maximum Solder Temperature 0.063"
below Seating Plane, t<5 sec.....................................................260°C
Relative Humidity at 85°C............................................................. 85%
Maximum Number of LEDs on at 100% Brightness ..........................128
Maximum Power Dissipation ...................................................1.7 Watts
IC Junction Temperature .............................................................125°C
ESD (100 pF, 1.5 KW)......................................................................2 KV
Maximum Input Current ...........................................................±100 mA.

Description

The SCD558100 (Red), SCD55101 (Yellow), SCD55102 (HER), SCD55103 (Green) and SCD55104 (HEG) are eight digit dot addressable 5x5 matrix, Serial Input, Intelligent Displays.

The ten 0.145" (3.68 mm) high digits SCD55100 are packaged in a rugged, high quality optically transparent, standard 0.3" pin spacing 28 pin plastic DIP.

The on-board CMOS SCD55100 has a 200 bit RAM, one bit associated with one LED, each to generate User Defined Characters. Due to the reduced LED count, power requirement and heat dissipation are reduced by 30%. Additionally in Power Down Mode quiescent current is <50 mA.

The SCD55100 is designed to work with the Serial port of most common microprocessors. The multiplex Clock I/O (CLK I/O) and multiplex Clock Select (CLK SEL) pins offer the user the capability to supply a high speed external multiplex clock. This feature can minimize audio in-band interference for portable communication equipment or eliminate the
visual synchronization effects found in high vibration environments such as avionic equipment