SBD1030CT

The SBD1030CT is designed as one kind of D-PAK power rectifiers which employs the schottky barrier principle with a molybdenum barrier metal.

SBD1030CT has eleven features. (1)Low forward voltage. (2)Low switching noise. (3)High surge capacity. (4)Guarantee reverse avalance. (5)Guard-ring for stress protection. (6)Lower power loss&high efficiency. (7)125°C operating junction temperature. (8)Lower stored charge majority carrier conduction. (9)Similar size to the industry standard TO-251 package. (10)Plastic material used carries underwriters laboratory flammability classification 94V-O. (11)Weight 0.011 ounce, 0.295 grams. Those are all the main features.

Some SBD1030CT absolute maximum ratings have been concluded into several points as follow. (1)Its peak repetitive reverse voltage would be 30V. (2)Its working peak reverse voltage would be 30V. (3)Its DC blocking voltage would be 30V. (4)Its RMS reverse voltage would be 21V. (5)Its average rectifier forward current total device rated Vr would be 5A and would be 10A at Tc=100°C. (6)Its peak repetitive forward current rated Vr square wave 20KHz would be 10A. (7)Its non-repetitive peak surge current (surge applied at rate load conditions halfware, single phase 60Hz) would be 125A. (8)Its operating and storage junction temperature range would be from -65°C to 125°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some SBD1030CT electrical characteristics are concluded as follow. (1)Its maximum instantaneous forward voltage would be 0.55V with conditions of If=5A and Tc=25°C. (2)Its maximum instantaneous reverse current would be 500uA rated DC voltage and Tc=25°C and it would be 5.0mA rated DC voltage and Tc=100°C. And so on. At present we have not got so much information about this IC and we would try hard to get more information about it. If you have any question or suggestion or want to know more information please visit our website and contact us for details. Thank you!