SAK series

      SAK series which are designed for all general purpose applications are +85 low profile radial lead aluminum electrolytic capacitors.
      SAK have three features.The first one is that the capacitance range of SAK is from 1 F to 10,000 F.The second one is about low profile.The last one is that the voltage range of SAK series is from 6.3 WVDC to 400 WVDC.
      The following is about specification of SAK.Capacitance tolerance would be within ±20% at 120Hz and 20.Operating temperature range should be -40 to +85.Dissipation factor(tan ) at 120Hz and 20°C is as follows.When WVDC is 6.3 tan should be 0.28.When WVDC is 10 tan should be 0.24.When WVDC is 16 tan should be 0.20.When WVDC is 25 tan should be 0.28.When WVDC is 35 tan should be 0.16.When WVDC is 50 tan should be 0.14.When WVDC is 63 tan should be 0.10.When WVDC is 100 tan should be 0.08.When WVDC is 160 tan should be 0.20.When WVDC is 200 tan should be 0.20.When WVDC is 250 tan should be 0.20.When WVDC is 400 tan should be 0.25.Note: For above D.F. specifications, add .02 for every 1,000 F above 1,000 F.Leakage current should be 0.03 CV or 4 A whichever is greater when the time is 1 minute and WVDC100WVDC.Leakage current should be 0.01 CV or 3 A whichever is greater when the time is 2 minutes and WVDC100WVDC. SAK series Leakage current should be 0.04 CV or 100 A when the time is 1 minute and WVDC150WVDC.When temp is -25/ +20, impedance ratio (Max.)at 120 Hz should respevtively be 5,4,3,2,2,2,2,2,4,4,4 and 4 corresponding to WVDC are 6.3,10,16,25,35,50,63,100,160,200,250 and 400.When temp is -40/ +20 the corresponding impedance ratio(Max.) at 120 Hz should respevtively be 12,10,8,5,4,3,3,3,15,15,15 and 10.Load life should be 2,000 hours at 85°C with rated WVDC when capacitance change <20% of initial measured value,dissipation factor <200% of initial specified value and leakage current <initial specified value.Shelf life should be 1,000 hours at 85°C with no voltage applied.Units will meet load life specifications.