Features: · High-speed on-chip amplifier (14 MHz, 2/3-inch NTSC B/W TV correspondence)· Greater than 90 % quantum efficiency· Wide spectrum range· Built-in TE-cooler· MPP operation· Non-cooled types: S7986-01 One-stage TE-cooled types: S7987-01 (Two-stage TE-cooled types are optional)Application· ...
S7986-01: Features: · High-speed on-chip amplifier (14 MHz, 2/3-inch NTSC B/W TV correspondence)· Greater than 90 % quantum efficiency· Wide spectrum range· Built-in TE-cooler· MPP operation· Non-cooled types...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Parameter |
Symbol |
Min. |
Max. |
Unit |
Operating temperature |
Topr |
-50 |
+30 |
°C |
Storage temperature |
Tstg |
-50 |
+70 |
°C |
OD voltage |
VOD |
-0.5 |
+25 |
V |
RD voltage |
VRD |
-0.5 |
+18 |
V |
ISV voltage |
VISV |
-0.5 |
+18 |
V |
ISH voltage |
VISH |
-0.5 |
+18 |
V |
IGV voltage |
VIG1V, VIG2V |
-10 |
+15 |
V |
IGH voltage |
VIG1H, VIG2H |
-10 |
+15 |
V |
SG voltage |
VSG |
-10 |
+15 |
V |
OG voltage |
VOG |
-10 |
+15 |
V |
RG voltage |
VRG |
-10 |
+15 |
V |
TG voltage |
VTG |
-10 |
+15 |
V |
Vertical clock voltage (image area) |
VP1VI, VP2VI |
-10 |
+15 |
V |
Vertical clock voltage (storage area) |
VP1VS, VP2VS |
-10 |
+15 |
V |
Horizontal clock voltage |
VP1H, VP2H |
-10 |
+15 |
V |
S7986-01 and S7987-01 are a family of FT-CCD area image sensors specifically designed for high speed operation. A high frame rate is attained by employing a wide band width on-chip amplifier. In area scan operation, S7986-01 and S7987-01 can be used as a high frame rate camera, and 2/3-inch NTSC B/W TV correspondence. S7986-01 and S7987-01 also feature low dark signal (MPP mode operation). S7986-01 and S7987-01 have an effective pixel size of 14 * 14 m and is available in image areas of 9.212 (H) * 6.860 (V) mm.
One-stage peltier cooler is built into the package for thermoelectric cooling (S7987-01). At room temperature operation, the device S7986-01 can be cooled down to -10 °C (Typ.) without using any other cooling technique. In addition, since both the CCD chip and the peltier cooler are hermetically sealed, no dry air is required, thus allowing easy handling.