S202SE2

Circuit: SPST-NO (1 Form A)
Relay Type: Relay
Packaging: Tube
Mounting Type: Through Hole
Termination Style: PC Pin
Output Type: AC, Zero Cross
On-State Resistance: -
Voltage - Input: 1.2VDC
Supplier Device Package: 4-SIP
Package / Case: 4-SIP
Manufacturer: Sharp Microelectronics
Voltage - Load: 0 ~ 240 V
Series: S202
Load Current: 8A


Features:

1. Comforms to European Safety Standard (EN60950)
   (Need of the insulation sheet when mounting external heat sink )
    Internal insulation distance : 0.4mm or more
    Creepage distance : 5mm or more
    Space distance : 4mm or more
2. RMS ON-state current
    S202SE1 / S202SE2 : 8Arms at Tc <= 80°C
    ( with heat sink)
    S216SE1 / S216SE2 : 16Arms at Tc <= 60°C
    ( with heat sink)
3.Isolation voltage. .between input and output (V : 3 000V)
4. Approved by TUV, No. R9051479
5. Recognized by UL, No. E94758
    (S202SE1/ S202SE2)
   Approved by CSA, No. LR63705
    (S202SE1, S202SE2 )

Application

1. Copiers
2. Laser beam printers


Specifications

Parameter		Symbol	Rating		Unit
			S202SE1/S202SE2	S216SE1/S216SE2
Input	Forward current	IF	50		mA
	Reverse voltage	VR	6		V
Output	RMS ON-state current	IT	*48	*516	Arms
	*1Peak one cycle surge current	Isurge	80	160	A
	Repetitive peak OFF-state voltage	VDRM	600		V
	Non-repetitive peak OFF-state voltage	VDSM	600		V
	Critical rate of rise of ON-state current	dIT/dt	50		A/s
	Operating frequency	f	45 to 65		Hz
*2 Isolation voltage		Viso	3,000		Vrms
Operating temperature		Topr	- 25 to + 100		°C
Storage temperature		Tstg	- 30 to + 125		°C
*3 Soldering temperature		Tsol	260		°C

*1 60Hz sine wave, Tj = 25°C start withstand voltage tester with zero-cross circuit. (Input and output shall be shorted respectively) .(Note) When the isolation voltage is necessary at using external heat sink, please use the insulation sheet.(Need of the insulation sheet when mounting external heat sink )
1. Comforms to European Safety Standard (EN60950)
*2 AC 60Hz for 1 minute, 40 to 60% RH, Apply voltages between input and output by the dielectric
*3 For 10 seconds *4 T_C<=80°C *5 T_C<=60°C

Parameters:

Technical/Catalog Information	S202SE2
Vendor	Sharp Microelectronics
Category	Relays
Mounting Type	Through Hole
Termination Style	PC Pin
Package / Case	4-SIP
Circuit	SPST-NO (1 Form A)
Load Current	8A
Voltage - Input	1.2VDC
Voltage - Load	0 ~ 240 V
Output Type	AC, Zero Cross
On-State Resistance	-
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	S202SE2 S202SE2 425 1251 5 ND 42512515ND 425-1251-5