Linear and Switching Power Supplies
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Product : | Switching Supplies |
The features of S-320 series(320W single output switching power supply) are AC input range, selectable by switch, Protections: Short circuit / Overload / Over voltage / Over temperature, Forced air cooling by built-in DC fan, Cooling Fan ON-OFF auto control, 100% full load burn-in test, Fixed switching frequency at 90KHz, 2 years warranty.
The output of S-320-5 are DC voltage(5V), rated current(50A), ripple &noise(150mVp-p), voltage adj. range(4.5~7.5V), voltage tolerance(2.0%), line regulation(0.5%), load regulation(1.0%), setup, rise time(2000ms, 20ms at full load), hold up tim ( 24ms at full load).
The intput of S-320-5 are voltage range(88~132VAC/176~264VAC by switch 248~370VDC), frequency range(47~63Hz), efficiency(77%), AC current(6A/115VAC, 36A/230VAC), inrush current(18A/115VAC, 36A/230VAC), leakage current(<3.5mA /240VAC).
The output of S-320-12 are DC voltage(12V), rated current(25A), ripple &noise(150mVp-p), voltage adj. range(10~13.2V), voltage tolerance(1.0%), line regulation(0.5%), load regulation(0.5%), setup, rise time(2000ms, 20ms at full load), hold up tim (24ms at full load).the intput of S-320-12 are voltage range(88~132VAC/176~264VAC by switch 248~370VDC), frequency range(47~63Hz), efficiency(82%), AC current(6A/115VAC, 36A/230VAC), inrush current(18A/115VAC, 36A/230VAC), leakage current(<3.5mA /240VAC).
(notes:1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pairwire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.)
The environment of S-320 series are working temp.(-10~+60(refer to output load derating curve)), working humidity(20~90% RH non-condensing), storage temp(-20~+85,10~95 %RH), temp.coefficient(0.03%/(0~50)), vibration(10~500Hz, 2G 10min./1 cycle, period for 60 min. each along X,Y,Z axes).