RSS series

      RSS series series which are designed for all general purpose applications are +85 low profile radial lead aluminum electrolytic capacitors.
      RSS series have five features.The first one is that RSS are suitable for dipped tantalum replacement.The second one is about small case sizes.The third one is that the capacitance range of RSS is from 1 F to 2200 F.The fourth one is that the voltage range of RSS series is from 6.3 WVDC to 50 WVDC.The last one is about Solvent tolerant end seals standard.
      The following is about specification of RSS series.Capacitance tolerance would be within ±20% at 120Hz and 20.Operating temperature range should be -40 to +85.Dissipation factor(tan ) at 120Hz and 20°C is as follows.When WVDC is 6.3 tan should be 0.25.When WVDC is 10 tan should be 0.20.When WVDC is 16 tan should be 0.17.When WVDC is 25 tan should be 0.15.When WVDC is 35 tan should be 0.12.When WVDC is 50 tan should be 0.10.Leakage current should be 0.01 CV or 3 A whichever is greater when the time is 2 minutes and WVDC50WVDC.When temp is -25/ +20, impedance ratio (Max.)at 120 Hz should respevtively be 5,4,3,2,2 and 2 corresponding to WVDC are 6.3,10,16,25,35 and 50.When temp is -40/ +20 the corresponding impedance ratio(Max.) at 120 Hz should respevtively be 10,8,6,4,4 and 4.Load life should be 1,000 hours at 85°C with rated WVDC when capacitance change 20% of initial measured value,dissipation factor 200% of initial specified value and leakage current initial specified value.Shelf life should be 500 hours at 85°C with no voltage applied.Units will meet load life specifications.When the frequencies were 50Hz,120Hz,400Hz,1kHz,10kHz and 100kHz,the corresponding Ripple Current Multipliers were 0.8,1.0,1.3, 1.45,1.65 and 1.7.When the temperature respectively, +85,+70 ,+60 and +30,the corresponding ripple current multipliers were 1.0,1.3,1.5 and 1.8.