RMR series

This is the description about RM series and RMR series of the surface mounting type dip swith.

Here are the features: 1. RM series (raised actuator) and RMR series (recessed actuator) available for different purposes. 2. Low contact resistance, and self-clean on contact area. 3. Gold plated electrical contact and terminal plating by gold give excellent results when soldering. 4. Double contacts offer high reliability. 5. All materials are UL94V-0 grade fire retardant plastics.

The electrical specifications of RMR series are these. Electrical life is 2000 operation cycles per switch 24VDC, 25mA. Non-switching rating is 100mA, 50 VDC. Switching rating is 25mA, 24VCD. Contact resistance is (a) 50m max. at initial and (b) 100m max. after life test. Insulation resistance is 100M min. (at 500VDC). Dielectric strength is 500VAC/1 minute. Capacitance is 5pF max. Circuit is single pole single throw.

These are the mechanical specifications of RMR series. Mechanical life is 2000 operations per cycle switch. Operation force is 600gf max. Stroke is 0.9mm. Operation temp is from -25° C to +70° C. Storage temp is from -40° C to +85° C. Vibration test is MIL-STD-202F METHOD 201A. Frequency is 10-55-10Hz/1 min. Directions are X, Y, Z, three mutually perpendicular directions. Time is 2 hours each direction; high reliability. Shock test is MIL-STD-202F METHOD 213B; condition A. Gravity is 50G (peak value), 11 m/sec. Direction and times are 6 sides and three times in each direction; high reliability.

At present there is not too much information about RMR series. If you are willing to find more about the RM series and RMR series, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.