Features: Generic
· Three access channels in one package
· +3.3V operation with +5V tolerant inputs
· Downloadable controller firmware and data pump code
· Advanced RISC Machines (ARM) architecture
· Low-power sleep mode with quick wake
· Glueless interface to Bt8370 T1/E1/PRI framer with time slot selection
· Built-in phase lock loop (PLL)
Signaling
· DTMF detection and generation
· Multi frequency tone support for legacy network equipment (R1 and R2)
Data
· Data modem modes
- PSTN: ITU-T V.90, K56flex, K56Plus, V.34 (33.6 kbps), V.FC, V.32 bis, V.32, V.22 bis, V.22A/B, V.23, and V.21; Bell 212A and 103
- ISDN: 64/56 kbps ISDN Basic Rate Interface B Channel HDLC control, or data pass-through mode for HDLC processing elsewhere in the central site system
· Internal error correction and data compression (ECC)
- V.42 LAPM, MNP 2-4, and MNP 10EC
- V.42 bis and MNP 5 data compression
· Async/sync HDLC conversion
· V.120 ISDN data
· V.110 cellular data
· LAP-B X.75
Voice (RL56CSMV/3 only)
· Baseline configuration:
- G.723.1 and G.723.1 Annex A
- G.711 m-law and A-law
- G.729 Annex A and Annex B
- G.168 128 ms Network Echo Canceller
· Patented robust jitter buffer
· Voice API using Mailbox Messages
FAX
· Fax modem send and receive rates up to 14400 bps
· V.17, V.33, V.29, V.27 ter, and V.21 channel 2
· Group 3, T.30 protocol and Class 1, 2 supported
· T.38 real-time fax protocol
Specifications
|
Parameter |
Symbol |
Limits |
Units |
| Supply Voltage |
VDD |
-0.5 to +4.0 |
V |
| Input Voltage |
VIN |
-0.5 to (VGG +0.5) |
V |
| Operating Temperature Range |
TA |
-0 to +70 |
°C |
| Storage Temperature Range |
TSTG |
-55 to +125 |
°C |
| Voltage Applied to Outputs in High Impedance (Off) State |
VHZ |
-0.5 to (VGG + 0.5) |
V |
| DC Input Clamp Current |
IIK |
±20 |
mA |
| DC Output Clamp Current |
IOK |
±20 |
mA |
| Static Discharge Voltage (25°C) |
VESD |
±2500 |
V |
| Latch-up Current (25°C) |
ITRIG |
±300 |
mA |
| Latch-up Current (125°C) |
ITRIG |
±150 |
mA |
| Latch-up Current (25°C) |
ITRIG |
±400 |
mA |
| Maximum Junction Temperature |
TJ |
125 |
°C |
DescriptionThe RL56CSM3 provides the processing core for three channels of a central site Remote Access Server supporting high speed T1/E1/PRI digital lines. The OEM adds two oscillators, SDRAM, and discrete components to complete the Multi-Service Access Processor system.
The access processor RL56CSM3 includes a full-featured, self-contained data/fax/Voice modem solution shown in Figure 1-1. Data
modem handshake, fax modem protocol, voice codecs, and ISDN data connection functions are supported and controlled through the AT command set.
RL56CSM3 Data Sheet
