RJSD0600

This is the description about RJSD0600 of the telecom - power cross protection and ballast protection. RJS Fuses are primarily intended for use in telecommunication circuit applications requiring low current protection with high surge tolerance. They are typically used to replace heat coil type devices. They are designed to be placed between the line input and the surge arresting components (mov. gas tube, zenor diode, air gaps, etc.). These fuses will withstand transient surge currents generated by lightning in accordance with the attached table. RJS fuses guard protected circuitry against sustained overload or short circuit conditions. Such sustained overloads may be generated by accidental contact between utility cables and phone lines (power line cross). RJS Fuse is used in circuits to obtain compliance with the test requirements specified in UL 1459/1950 and Bellcore GR 1089.

These are the RJSD0600 environmental specifications. Soldering conditions: Wave solder is 260°C, 10 sec max. (MIL-STD-202, Method 210); Solderability is MIL-STD-202, method 208. Shock: MIL-STD-202, method 213, test condition I (100 G's peak for 6 milliseconds). Vibration: MIL-STD-202, method 201 (10-55 Hz, 0.06 inch, total excursion). Salt Spray: MIL-STD-202, method 101, test condition B (48 hrs). Insulation Resistance: MIL-STD-202, method 302, test condition A (after opening) 10,000 ohms minimum. Resistance to solder Heat: MIL-STD-202, method 210, test condition C (260°C, 20 sec). Thermal shock: MIL-STD-202, Method 107, Test Condition (-65°C to +125°C). Operating temperature is from -55°C to +125°C.

At present there is not too much information about this model. If you are willing to find more about the RJSD0600, please pay attention to our web! We will promptly update the relevant information. You can find it in www.ChinaICMart.com or www.seekic.com. Welcome to contact with us.