PinoutDescriptionThe RJ21P3AA0PT is a 1/1.8-type (8.93 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices). With approximately 3 370 000 pixels (2 152 horizontal x 1 567 vertical), the sensor provides a stable high-resolution color image. Features of th...
RJ21P3AA0PT: PinoutDescriptionThe RJ21P3AA0PT is a 1/1.8-type (8.93 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices). With approximately 3 370 000 pixels (2 152 hor...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The RJ21P3AA0PT is a 1/1.8-type (8.93 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices). With approximately 3 370 000 pixels (2 152 horizontal x 1 567 vertical), the sensor provides a stable high-resolution color image.
Features of the RJ21P3AA0PT are:(1)pixel pitch : 3.45 m (H) x 3.45 m (V); (2)R, G, and B primary color mosaic filters; (3)supports monitoring mode ; (4)low fixed-pattern noise and lag; (5)no burn-in and no image distortion; (6)blooming suppression structure; (7)built-in output amplifier; (8)built-in overflow drain voltage circuit and reset; (9)gate voltage circuit; (10)variable electronic shutter.The image area is divided into 10 x 10 segments under the standard exposure conditions.Each segment's voltage is the average output voltage of all pixels within the segment. PRNU is defined by (Vmax Vmin)/Vo,where Vmax and Vmin are the maximum and minimum values of each segment's voltage respectively.
The absolute maximum ratings of the RJ21P3AA0PT can be summarized as:(1)output transistor drain voltage:0 to 18V;(2)storage temperature range:-40 to 85;(3)ambient temperature range:-20 to 70;(4)vertical shift register clock voltage:Vpw to 18V;(5)DC blocking voltage:1000V;(6)average rectified forward current:30A;(7)horizontal shift register clock voltage:0.3 to +12 V;(8)voltage difference between vertical clocks:0 to +18 V.The sensor is exposed at the exposure level corresponding to the standard conditions. AI is defined by the ratio of the output voltage measured at the 1st field during the non-exposure period to the standard output voltage.The sensor is exposed only in the central area of V/10 square, where V is the vertical image size.ABL is defined by the ratio of the exposure at the standard conditions to the exposure at a point where blooming is observed.
At present there is not too much information about this model.If you are willing to find more about RJ21P3AA0PT, please pay attention to our web! We will promptly update the relevant information.