Features: • Enhancement-Mode MOSFET Transistors (IDD0 @ VDD=12.5V, VGG=0V)• Pout>18W, >20% @ VDD=12.5V, VGG=5V, Pin=200mW• Broadband Frequency Range: 1.24-1.30GHz• Low-Power Control Current IGG=1mA (typ) at VGG=5V• Module Size: 66 x 21 x 9.88 mm• Linear op...
RA18H1213G: Features: • Enhancement-Mode MOSFET Transistors (IDD0 @ VDD=12.5V, VGG=0V)• Pout>18W, >20% @ VDD=12.5V, VGG=5V, Pin=200mW• Broadband Frequency Range: 1.24-1.30GHz• Low-...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SYMBOL | PARAMETER | CONDITIONS | RATING | UNIT |
VDD | Drain Voltage | VGG<5V, ZG=ZL=50W | 17 | V |
VGG | Gate Voltage | VDD<12.5V, Pin=0mW, ZG=ZL=50 | 6 | V |
Pin | Input Power | f=1.24-1.30GHz, ZG=ZL=50 |
300 | mW |
Pout | Output Power | 30 | W | |
Tcase(OP) | Operation Case Temperature Range | f=1.24-1.30GHz, ZG=ZL=50 | -30 to +110 | |
Tstg | Storage Temperature Range | -40 to +110 |
The RA18H1213G is a 18-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 1.24- to 1.30-GHz range.
The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.5V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA.
This RA18H1213G module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power.