R192P

The R192P 10.7 Gbits/s fiber-optic receiver consists of a high-speed PIN photodetector and a wide-band linear preamp in a pigtailed, surface-mount metal package. The R192P  is designed for use in single-mode, high-speed telecommunication applications at the SONET OC-192 and the ITU-T SDH STM-64 data rate of 9.95328 Gbits/s.

At 10.7 Gbits/s, the typical room temperature sensitivity measured at a BER of 1 x 10¹⁰ is 17 dBm. The R192P operating case temperature range for the receiver is 0 °C to 70 °C.

The receiver of R192P is manufactured in a compact, 16-pin surface-mount package with a single-mode optical fiber pigtail. The fiber pigtail is internally beveled for low return loss and is available with ST, SC, LC, or FC-PC optical connectors.

The dc levels of the differential outputs of R192P can be adjusted relative to each other for optimum sensitivity in noisy, amplified systems. These outputs of R192P are centered around a dc level of typically 0.45 V. The TIA requires only a 5 V power supply for operation. The PIN photodiode requires a nominal bias voltage of 5 V to 10 V at less than 1 mA.