QTLP610CIR

Specifications

Product	Product status	Eco Status	Package type	Leads	Packing method	Package Drawing
QTLP610CIRTR	Full Production	RoHS Compliant	PLCC	2	TAPE REEL	TBD

** A sample button will appear if the part is available through Fairchild's on-line samples program. If there is no sample button, please contact a Fairchild distributor to obtain samples

Description

QTLP610CIR is an infrared emitter in miniature SMD package molded in a water clear plastic with right angle lens.

The QTLP610CIR has six features. The first is right angle surface mount package, and the second feature that the QTLP610CIR has is that it is available in 0.315" (8mm) width tape on 7" (178mm) diameter reel and 2,000 units per reel, the third feature that the QTLP610CIR has is that it has a wide viewing angle which is 160°, the forth feature is that its wavelength is 940 nm, and it has a feature of GaAs. The fifth feature QTLP610CIR has is that it has water clear lens. At last you must know that the matched photosensor of the QTLP610CIR is QTLP610CPD.
The QTLP610CIR has eight absolute maximum ratings and you must know that TA =25°C unless otherwise specified. The first absolute maximum rating is that you must know that the continuous forward current is 65 mA. The second absolute maximum rating is that peak forward current is 1.0 A, this is very important, so that you must remember it, and you also should know that the situation is pulse width is 100s and duty cycle is1%. The third absolute maximum rating you must know is that reverse voltage is 5 V. The fourth absolute maximum rating is Power Dissipation, which is 100 mW. The fifth absolute maximum rating is operating temperature, which must range from -40 to +85°C. The sixth absolute maximum ratings is storage temperature, which must range from -40 to +90°C.The seventh absolute maximum rating you must know is soldering temperature (iron) ,which is 240 for 5 sec°C. At this time you should notice there points, one is RMA flux is recommended. One is methanol or isopropyl alcohols are recommended as cleaning agents. And the other is soldering iron tip at 1/16" (1.6mm) from housing. The eighth is soldering temperature (flow), , which is 240 for 10 sec°C.