QS5807

The QS5807 is designed as guaranteed low skew CMOS clock driver/buffer which can be used for clock buffering schemes where skew is a key parameter.

QS5807 has many features. The first one is it would have 10 outputs. The second one si rail to rail output voltage swing. The third one is 25 on-chip resistors available for low noise. The fourth one is input hysteresis for better noise margin. The fifth one is guaranteed low skew which means 0.3ns same transition and 0.6ns opposite transition and 1.0ns different devices. The sixth one is inductrial temperature range. The seventh one is it would be available in QSOP (Q) and SOIC (SO). That are all the main features.

Some absolute maximum ratings of QS5807 have been concluded into several points as follow. The first one is about its supply voltage to ground which would be from -0.5V to 7.0V. The second one is about its DC output voltage which would be -0.5V to 7.0V. The third one is about its DC input voltage which would be from -0.5V to 7.0V. The fourth one is about its AC input voltage (for a pulse width <= 20ns) which would be -3.0V. The fifth one is about its DC input diode current with Vin<0 which would be -20mA. The sixth one is about its DC output current max sink current/pin which would be 120mA. The seventh one is about its maximum power dissipation which would be 0.82W for QSOP and 0.75W for SOIC. The last one is about its storage temperature range which would be from -65°C to 150°C. It should be noted that stresses greater than those listed under absolute maximum ratings may cause permanent damage to QSI devices that result in functional or reliability type failures. And so on. If you have any question or suggestion or want to know more information about QS5807 please contact us.