Features: - 10 output, low skew clock signal buffer- Pinout and function compatible with QS5805T- JEDEC compatible LVTTL inputs and outputs- Input hysteresis for better noise margin- Monitor output- Guaranteed low skew:· 0.7ns output skew· 1.1ns pulse skew· 1ns part-to-part skew- Clock inputs are ...
QS5380A: Features: - 10 output, low skew clock signal buffer- Pinout and function compatible with QS5805T- JEDEC compatible LVTTL inputs and outputs- Input hysteresis for better noise margin- Monitor output-...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Rating |
Symbol |
Max |
unit |
Supply Voltage Range |
V CC1, VCC2 |
0.5 to +4.6
|
V |
Input Voltage Range |
VI (2)
|
0.5 to +5.5 |
V |
Voltage range applied to any output in the high or low state |
VO(2) |
0.5 to VDD + 0.5
|
V |
Input clamp current |
IIK (VI < 0)
|
50 |
mA |
Terminal Voltage with Respect to GND (inputs VIH 2.5, VIL 2.5) |
IOK (VO < 0 or VO > VDD) |
-50
|
mA |
Continuous Output Current |
IRES |
±100 |
mA |
Continuous Current |
VDD or GND |
65 to +150 |
mA |
Junction Temperature |
TSTG |
150 |
°C |
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This isstress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. Vcc Terminals.
3. All terminals except Vcc.
The QS5380A clock buffer/driver circuits can be used for clock buffering schemes where low skew is a key parameter. This device offers two banks of 5 non-inverting outputs. The QS5380A device provides low propagation delay buffering with on-chip skew of 0.7ns for same-transition, same-bank signals. This clock buffer product is designed for use in high performance workstations, embedded and personal computing systems using 3V to 3.6V supply voltages. Several can be used in parallel or scattered throughout a system for guaranteed low skew, system-wide clock distribution networks.
The QS5380A can accept 5V input and control signals. The QS53805 is characterized for operation at -40°C to +85°C.