Features: • 5 bidirectional switches connect inputs to outputs• Pin compatibility with QS3245• 250ps propagation delay• Undershoot clamp diodes on all switch and control inputs• LVTTL-compatible control inputs• Available in 80-pin QVSOP packageApplication•...
QS34XV245: Features: • 5 bidirectional switches connect inputs to outputs• Pin compatibility with QS3245• 250ps propagation delay• Undershoot clamp diodes on all switch and control inpu...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Description |
Max |
Unit |
VTERM(2) |
Supply Voltage to Ground |
0.5 to +4.6 |
V |
VTERM(3) |
DC Switch Voltage Vs |
0.5 to +4.6 |
V |
VTERM(3) |
DC Input Voltage VIN |
0.5 to +4.6 |
V |
VAC |
AC Input Voltage (pulse width 20ns) |
3 |
V |
IOUT |
DC Output Current |
120 |
mA |
PMAX |
Maximum Power Dissipation (TA = 85°C) |
0.92 |
W |
TSTG |
Storage Temperature |
65 to +150 |
°C |
The QS34XV245 is a set of 32-bit high speed bus switches controlled by LVTTL-compatible active low enable signal. When closed, the switches exhibit near zero propagation delay without generating additional ground bounce or switching noise.
The QS34XV245 is specially designed for direct interface betweeen 3.3V and 2.5V devices without any external components. When operating from a 3.3V supply, the logic high level at the switch output is clamped to 2.5V when the switch input signal exceeds 2.5V. This device can be used for switching 2.5V buses without signal attenuation. The ON resistance at 3.3V VCC is less than 5 typical, providing near zero propagation delay through the switch. Absence of DC path from switch I/O pins to VCC or ground makes QS34XV245 an ideal device for hot swapping applications.
The QS34XV245 is characterized for operation from -40°C to +85°C.