PXU-20

The PXU-20 is designed as process signal converter for conversion of an analogue process signal to another type and / or to provide galvanic isolation. A typical application would be to convert a signal from a probe, not directly compatible with an analogue input of a PLC and / or provide galvanic isolation between input and output.

PXU-20 has six features. The first one isinput 0 to 5V / 0 to 10V / -10 to +10Vdc / 0 to 20 / 4 to 20mA in one version. The next one is output 0 to 10Vdc / 0 to 20 / 4 to 20mA - selected via terminals. The next one is output offset and gain adjustable +/-5%. The next one is it would have LED indication or input less that 5% / i.e. indication of probe failure. The next one is galvanically isolation supply / input / output is 3.75kV AC 1 min. The next one is its operating voltage would be 24Vdc, 24Vac, 115Vac or 230Vac. That are all the main features.

Some general specifications of PXU-20 have been concluded into several points as follow. The first one is about its ambient temperature range which would be from -20 to 55°C. The next one is about its storage temperature range which would be from -40 to 80°C. The next one is about its mounting which would be 35mm DIN-rail (EN50022). The next one is about its terminals which would be screw terminals with dual compartment. Terminal screws are combined crosshead / slotted. Up to 2 X 2.5mm2 wire (2 X 1.5mm2 inc. ferrule). The next one is about its indicators which would be operating voltage for green LED and input less than 5% of FS. for yellow LED. The next one is about its protection which would be IP20. The next one is about its electric isolation which would be 3.75kVac (1 min) between input, supply and relay output. And so on. For more information please contact us.