PXL-20

The PXL-20 is designed as threshold relay for the monitoring or control of common types of process signals. The process signal to be monitored is selected on the front panel and the threshold value is also adjusted via a setpoint potentionmeter on the front of the relay.

PXL-20 has seven features. The first one isinput 0 to 5V / 0 to 10V / -10 to +10Vdc / 0 to 20 / 4 to 20mA in one version. The next one is adjustable setpoint. The next one is hysteresis adjustable +/- 0.5 - 20%. The next one is it would have automatic locking (latch). The next one it would have inversion of relay function. The next one it would have output solid state no/nc. The next one is its operating voltage would be 24Vdc, 24/115Vac or 24/230Vac. That are all the main features.

Some general specifications of PXL-20 have been concluded into several points as follow. The first one is about its ambient temperature range which would be from -20 to 55°C. The next one is about its storage temperature range which would be from -40 to 80°C. The next one is about its mounting which would be 35mm DIN-rail (EN50022). The next one is about its terminals which would be screw terminals with dual compartment. Terminal screws are combined crosshead / slotted. Up to 2 X 2.5mm2 wire (2 X 1.5mm2 inc. ferrule). The next one is about its indicators which would be operating voltage for green LED and input less than 5% of FS. for yellow LED. The next one is about its protection which would be IP20. The next one is about its electric isolation which would be 3.75kVac (1 min) between input, supply and relay output. And so on. For more information please contact us.