PTN3341

 Meets or exceeds the requirements of ANSI TIA/EIA-644 Standard
Low-Voltage Differential Signaling with output voltage of 350 mV across a 50   load or 700 mV across a 100   load
200 ps maximum channel-to-channel output skew
600 ps typical output voltage rise and fall times
Driver at high impedance when disabled or with V_CC = 0 V
5 volt tolerant inputs with Low Voltage TTL (LVTTL) logic input levels
Pin-compatible with AM26LS31, SN65LVDS31, SN65LVDM31 and PTN3331.

 Low voltage, low EMI, high speed differential signaling
Point-to-point high speed data transmission
High performance switches and routers

The PTN3341 is a differential line driver that implements the electrical characteristics of Low-Voltage Differential Signaling (LVDS) that meets or exceeds the requirements of the ANSI TIA/EIA-644 Standard. LVDS is used to achieve higher data rates on commonly used media. LVDS overcomes the limitations of achievable slew rates and EMI restrictions of previous differential signaling techniques. The PTN3341 operates at 3.3 volt supply levels and current mode output drivers. The output drivers will deliver a minimum of 250 mV into a 50 W load when enabled.

The intended application of this device is for point to point baseband transmission rates over a controlled impedance media of approximately 100 W. The maximum rates and distance of data transfer are dependent upon the attenuation characteristics of the media selected and the noise coupling to the environment.

The PTN3341 is designed to function over the full industrial temperature range of -40 °C to +85 °C.