Features: • Input Voltage: 36 V to 75 V
• 30-W Total Output Power
• Output Voltages: 3.3 V, 5 V, and 12 V
• Wide-Output Adjust/Trim
• Up To 88% Efficiency
• Overcurrent Protection
• Overtemperature Shutdown
• Undervoltage Lockout
• Input Overvoltage Protection
• Auto-Track™ Power-Up Sequencing (Includes Sequenced Output with PTB48560B)
• Smart-Sense Remote Sensing (PTB48560B)
• Dual-Logic Enable Control
• Space-Saving 1×2 Footprint
• Surface Mount Package
• 1500-Vdc Isolation
• Agency Approvals (Pending):UL/cUL 60950, EN 60950Application• Intermediate Bus Architectures
• Telecom, High-End Computing Platforms
• Multi-Rail Power Systems with Power-Up SequencingSpecifications
|
VI |
Input Voltage |
Continuous |
75 |
UNIT |
| Surge, 1 s max |
100 1 |
V |
|
V(Track) |
Track input voltage |
|
0 to VO Bus + 0.3 |
|
|
I(Track)max |
Track input current |
From external source |
10 2 |
mA |
|
TA 1 |
Operating temperature range |
Over VI range |
40 to 85 |
°C |
|
|
Overtemperature protection |
PCB temperature (near pin 1) |
115 |
|
|
T(WAVE) |
Wave solder temperature |
Surface temperature of module or pins (5 seconds) |
PTB48560xAH |
260 3 |
|
|
T(REFLOW) |
Solder reflow temperature |
Sruprfiancse temperature of module |
PTB48560xAS |
235 3 |
|
| PTB48560xAZ |
260 3 |
|
|
Tstg |
Storage temperature |
|
40 to 125 |
|
(1) The converter's internal protection circuitry may cause the output to turn off when the applied input voltage is greater than 75 V.
(2) When the Track input is fed from an external voltage source, the input current must be limited. A 2.74-k value series resistor is recommended.
(3) During solder reflow of SMD package version, do not elevate the module PCB, pins, or internal component temperatures this peak temperature.
DescriptionThe PTB48560A is a series of 30W rated isolated dc/dc converters, designed to operate from a standard -48V telecom central office (CO) supply. Housed in a 1*2 package, each model has a wide-adjust output voltage that can be set to one of the common intermediate bus voltages of 3.3 V, 5 V, or 12 V.
The PTB48560A series incorporates Auto-Track™, a feature that simplifies the power-up sequencing of multiple power modules and operates from the same intermediate bus. During a power-up cycle, modules with this feature have the capability of following a common ramp voltage applied to an input called Track. The PTB48560A series is specifically designed to control the Track voltage of any number of nonisolated downstream modules powered from its output. This ensures that the outputs of the downstream modules all rise simultaneously during power up. The PTB48560A (3.3 V) has an additional sequenced output, VO Seq, which also rises with the Track voltage. This allows the VO Seq output to power up simultaneously with the outputs from other power modules under the control of Auto-Track.
Whether used to facilitate power-up sequencing, or operated as a stand-alone module, the PTB48560A series includes many other features expected of high-performance dc/dc converter modules. Precise output voltage regulation is ensured with a differential remote sense. Operational features include an input undervoltage lockout (UVLO) and a dual-logic output enable control. Overcurrent and overtemperature protection ensure survival against load faults.Typical applications include distributed power architectures in both telecom and computing environments, particularly complex digital systems requiring power sequencing of multiple power supply rails.
PTB48560A Data Sheet
